thank you.

I have a Park model at Little Winnie resort. I have been there now 4 years. I love it, very little maintenance.
Things I like.
I just pack up the boat, cooler, kids and dog and I ‘m gone. Once I get there unload the truck and we are ready to go. They have large lots and allow decks and your site. It is located a few miles from Winnie and close to many other lakes.
Cost $1800.00 a year to lease the site which includes water, septic (at your site), electricity (it has it own meter that you pay at the end of year) and lawn care( they ask you to weed whip around your camper). The lodge has a pool, play ground, fish cleaning shack and garbage trailer. You also leave the trailer there all year.
Things I don’t like.
Not right on the lake or a lake view.
Not really usable in the winter. They turn the water off mid October but you can still use your camper just no water.

Still for sale?

http://minneapolis.craigslist.org/hnp/boa/5712163545.html
try this one.

Todd Dankert and Tim Zwieg will not be able to attend. A dear friend suddenly passed away last night and the funereal is Sat.

Todd Dankert
Tim Zwieg

The Evinrude 150 is very good motor and it pushes over 160 hp. That and the additional features of no main. for 3 years and push button winterize is great for this area.

I just bought one off of ebay that has 4 camera and DVR that stores up to 30 dayshttp://www.ebay.com/itm/Zmodo-8CH-960H-Network-DVR-4-Outdoor-700TVL-Day-Night-Security-Camera-System-1T-/360773170367?pt=US_Surveillance_Security_Systems&hash=item53ffc1b4bf. It is the corded system, I was going to go with wireless however you need an outlet near by so I figured that the cord was just the same. I really like it. I put it all together and works great. It has pretty good night vision about 30 feet. I do have a motion light that when that trips you can see as far as the light goes. Do look at where it is shipping from there a lot from over seas that will take up to 30 days to get and you will need to pay extra charges too.

What I do is glassed in the regular transducer and installed the SI transducer on the back of the boat but above the bottom of the boat so when it is on plane the SI transducer is not in the water. The Y cable will automatically switch back and forth. I don’t even know that it happens and there is difference in the read out.

yes, faster processor and internal GPS ant. Other than that the same and they will connect with the 98 series. The new Onix is totally different and will not connect with any thing other than another Onix

if it is the part from marine general (a clip that goes on the end of electrical tubing either 3/4″ or 1/2″) Canvas craft in rogers has them in stock in a bag with 2 3/4″ and 2 1/2″ just to let you know. I just bought one that’s how I know.

Try Chad Benson, He is a full time guide on Cass and rents houses on Red. I have rented from for years and have done very well. 218-556-0823

I bought the diamond shaped rubber at Cabelas a couple years ago. It came in a sheet around 24″x30″ I think it was $30.00. I was in the marine dept.

Are you looking at the wiring outside where the old pump was ? Because most well pumps have a capacitor to start it usally located next to the pressure tank inside the house.
Or the red and black are your 2 hots and the white is a neutral, green is always ground. I would check with meter to make sure your hooking it up right.

I would go Glass, 18-20′, and Evinrude. I just had this conversation with a friend. my choice of boat would start with Ranger then Warrior then Lund and Skeeter. Either way It would have Humminbird, Minn Kota and Evinrude. I know you can’t get Evinrude on skeeter or lund but I wouls like to try.
This is my feelings I would test ride different boats with different motors and gear to see what you like and don’t like and put a package together that way.
Good luck and have fun.

I agree with the last post. check voltage on the 2 hot wires and it should be 240 volt (or close to it) If not then there is only one hot wire connected. Is the breaker a 2 pole? Maybe the stat is miss wired also. But the low heat is telling me it does not have sufficient voltage to produce the heat it is rated for.

I have the same unit and you will love it. I ran a seperate lines directly to the battery and a fuse right before you connect to the battery, that way the wire is protected all the way to the unit. As far as wire size I ran 14 gauge.

X3 on Artistic Anglers have a 32″ in my Man Cave will have him do my next mount too.

why don’t you like the chipper if you want to get rid of them? Mine freezes up really bad, what do you to prevent it?

Try Chad Benson 218-556-0823

I also have been using it for at least 15 years, love 12lb for trolling rods

Thanks that was great. My grandfather was killed April 1945 by a Kamikaze.

Good job guys.

I can’t seem to stop watching the post game shows. I know the Packer fans would be rubbing it in our faces. There was a pretty strong wind from the east last night, my guess is from the bubble bursting. Sorry, I couldn’t help myself.

The refs sure did want them to win.

On a differnt note I didn’t know Badgers could be that hot, did you see Miss America?

Keep your chin up Pack fans, at least you played one more game than we did.

Quote:

---

Quote:

---

But we do have Miss America for a year

---

Too bad she can’t throw a football.

---

Or catch one

I thought the Vikings could only choke that bad. The refs sure wanted the Pack to win, they were bad.

I dip my crank baits in a clear sealant after painting and I put the glitter in that not the paint.

Thanks for the help guys, I’m back online, Lisa came thru.

If you are looking for lead core shorty Cabelas have a couple but I own and recomend Sheels shorty’s.

I had a walleye done last year with Artistic Angler. I would recommend them, at least a peek. I know he had lower rate at the sports show might want to bring that up maybe bring that up.