My apologies,

The out of date fish finder, did not work, was an old Lowrance and is now in the trash. (Disposed of properly)

I only have the 93sv UHD2 and it is mounted on the bow.

I no longer have one at the console.

So I want to run the GT56 from the transom all the way to the bow to have the best of both worlds,,,,,for now.

Yes, in the future I plan on buying another chart plotter.

I should have done more research when I bought the 93sv UHD2, knowing I was buying Livescope, I bought the 93 without a transducer to save $100. Now to buy the transducer only is $450

Live and learn

James Almquist wrote:

That is what that port was made for. You have your power, NMEA, then sonar and the last port is your network port for your LVS34. If you buy a 106 you would use the network port to connect the 106 and then put the LVS34 on the 106 because it has 2 network ports. Then both units could use the LVS34 and the GT56 as inputs. Hope this make sense.

Like I said, I already have the 93SV and I do not want another chart plotter.