Check the ground wire on the top of frame by rear bumper.

Ace hardware in West Salem fills propane tanks.

McKeena is really good.I also like the 4 Roses single barrel.I have a Weller but haven’t cracked it yet.

John I always charged mine either in my warm basement or in a warm motel room and that’s after riding in my warm pick-up. My electronics never go in the back bed. I guess I just got a bad battery. It’s funny that shuttle hasn’t been used since last January and has been in the basement and I just turned it on and it’s at 97% but as soon as you put it on the ice it gets wimpy.:???:
[/quote]

My shuttle got replaced last year for that same issue. Now the replacement is acting the same. After about four on the ice down to about 50% warms up in the truck on the way home back up to 85-90%.

Yes you can I have my LX9 on one no drilling involved.

The box is attach to the factory cargo rack.

First fish I caught last winter
10.75. Waiting to get it back from the taxidermist.

Attachments:

1. 

   20171209_171223.jpg
   

2. 

   20171209_133519.jpg
   

Ryan I made it from square tube. And added an excel outdoors auger holder.

Here’s my setup.
Randy

Attachments:

1. 

   20180317_092245.jpg
   

2. 

   20180317_092304.jpg
   

3. 

   20180317_094117.jpg
   

I bought a kit it came with Tear Mender. Worked good.

Stayed in a sleeper through Twin Island early Jan. House was nice,checked on us at least twice a day. We were on fish all three days. Good outfit to go with.
Randy

Brandon
Here’s my setup.My sled had 12v plug so I put one on the power cord for the Helix. Used gimbal mount that came with unit.

Attachments:

1. 

   20171202_153205.jpg
   

I updated mine tonight. What is the difference between gain 1 and gain 2?

Are there any marking the clip? Would like to get some. No ranger dealer by me.

I’ve bought some at two different craft stores. Haven’t found ones that work yet.

I have an 06 F150 with 6.5 ft box. My otter lodge fits better without pivot hitch on. You can get tailgate shut with it on but really have push to shut it.

I have a F-150 with 6.5 ft box and it is hard to shut the tailgate with pivot hitch installed.

I have a Bullwhip with EVA split grip.I’m in Rockland Wi if you would like to see it and handle it.
Randy

Have used 2 LX-9s in same house no problem.Even in the same hole.

I to have a trip planned arriving
Thursday. Do you think we will be able to get on the ice with the warm up?
Randy

When are you heading out? I’m going on the 12th if the ice holds out.
Randy

I have an Otter XT1200 lodge it fits in my 06 F150 with 6.5 ft box. With pivot hitch on it is hard to shut the tailgate but it can be done. I had a little more room with my black camo Otter wild lodge.

A month ago I had my TUC Quick Tip get pulled over the edge of my Kenia and go down the hole.I heard a noise tuned around as handle disappeared. Need less to say I was quite upset. A guy fishing close by says “That was fast”. As I”m walking over to talk to him I notice he’s using A Tuned Up Custom and he asks what kind of rod it was. I say Tuned Up Custom. Fish weren’t biting so he says I’ll fish for that all day.
I drop the camera down in 20′ of murky water not expecting to be able to see anything. But right below the hole is my pole. With help from my new friend we had it back up the hole with in 10 minutes. That has been he best catch of my year so far.

Fluorescent light bulb protectors work also and are lighter.

bump

Have you found help? If not maybe I can help. Where you located?
Randy

Chris
How do you maintain temp in the chargriller with cold temps? I have the same smoker never use it when it cold out. Where you getting new smoker from?
Randy

The vent is in the fuel tank. Tube just under cap.

I have a kenai and yes it pulls hard.I built a smitty sled to pull it on.Also built an auger holder on it. You could come by and see it sometime. Might even be interested in selling it.
Randy

Yes, I have enter before. This year there were 15 shelters entered. Maybe we can meet up on the ice sometime.
Randy