Pm sent

Well it appears I had just applied the first coat to thin. Cleaned baits up and applied a second coat of envirotex. I couldn’t be much happier with the results. They turned out night and day better than the first batch I tried in September. Thanks for all the advice and tips.

Attachments:

1. 

   KIMG0456.jpg
   

2. 

   KIMG0458.jpg
   

3. 

   KIMG0457.jpg
   

Thanks for the tips, greatly appreciated.

Finally got back to painting some lures. I used envirotex lite and rotated the baits using a setup I made for my rod dryer. I noticed after the first coat has fully cured, I have a few spots on the baits not coated or coating is very thin. Spots are maybe 1/16 inch in diameter and about 6 spots per bait. My thought is to just add second coat on baits, is this a bad idea? Is there prep I need to do in-between coats on envirotex lite? Thanks for any advice.

Thanks, I have a rod dryer I can rig up to spin the lures. I will give envirotex lite a try. Nothing more upsetting then having the clear coat wreck all the work you put into painting them.

Pm sent