Another product to consider is Star Tron fuel treatment. Been using it for a few years with good results, can also be used in addition to Sta-bil.

STABIL-MOUNT?

For the Nils guys that are having a wobble issue, I would recommend turning the auger a half turn in the adapter and try it that way if you haven’t. To get mine to run true I had to attach the auger to the adapter with the round side of shaft facing the bolt and the flat side against the adapter. Also be sure to wiggle the shaft as you snug up the bolt to make sure the flats of the shaft seats square against the adapter.

was about 20″ last weekend

Kahtoola’s work fine on bare ice, the only negative is they do make a fair amount of noise when walking–can’t be stealthy, also might be a problem in a suitcase type house with a plastic floor?

I have MKA-32 Quick Release Bracket with Cover and it works well.

Also check out Top Gun in Shakopee, had my Competitor Sport done there last fall.

x2 for the Felpro gaskets, also change oil to make sure no coolant is in crankcase

I also use Star Tron and try to use non-oxy if available.

Thanks Steve for stepping up to the plate, hope you can hit’er out of the park, donation sent.

very nice layout, must have put a lot of thought into it

I’ve got the black ones, but I painted a couple of them white the other year to try it out and I’d say the white brightens the hole & makes it a little easier to see the float. Haven’t seen a glow one in action, might be intresting.

funny, but so true

now that’s a fishing tale, well done

very nice!!