Forum Replies Created

Viewing 30 posts - 1 through 30 (of 718 total)
  • nic-habeck
    Lake Mills, WI
    Posts: 831
    #1391881

    A few times…

    nic-habeck
    Lake Mills, WI
    Posts: 831
    #1373412

    Painful… These guys need to just lay down and call it a year.

    nic-habeck
    Lake Mills, WI
    Posts: 831
    #1367865

    Great hat, my shades clear the brim even with quite a bit of cup. My new favorite.

    nic-habeck
    Lake Mills, WI
    Posts: 831
    #1367667

    Walked out on my pond a bit spud goes through in one hit, no fishing for me. Snow on top of the little ice we did have not good.

    nic-habeck
    Lake Mills, WI
    Posts: 831
    #1366083

    Google your reel type/make for specifics. I use the standard oil that came with them. Most spinning reels have an access port to add a drop, lube the bail, wipe down, loosen drag to store. Most bait casters remove reel handle (tool came with reel) and remove drag wheel to expose bearing for a drop of lube. Remove spool tension knob, usually a spring underneath careful not to loose and lube bearing under. Remove non reel side cover and lube bearing. Lube both sides of worm gear and turn a few cranks. Loosen drag and tension for storage and wipe down. Takes me about an hour for 4 spinning and 10 baitcasters.

    nic-habeck
    Lake Mills, WI
    Posts: 831
    #1196421

    Just bought a box, ate one thought the same. Ate another to verify, still wasn’t sure. Ate one more and almost instantly had gut rot. Yup, they are the same.

    nic-habeck
    Lake Mills, WI
    Posts: 831
    #1192492

    Also interested!

    nic-habeck
    Lake Mills, WI
    Posts: 831
    #1177108

    I do not have the HD version but have updated, not much different for what I use, no negative effects.

    When I have issues with the unit locking on I change the lower depth setting from auto to 10 or 15 ft. If you have sonar only screen on hit menu once and it should show up. Cursor over to adjust depth setting. I also like this as it keeps from changing the scaling automatically and I know how deep it is with a glance vs reading numbers.

    nic-habeck
    Lake Mills, WI
    Posts: 831
    #1164094

    Just drove by the rock river same. Looks like 2008. Boat landing is under there somewhere.

    nic-habeck
    Lake Mills, WI
    Posts: 831
    #1160273

    Pic of the smallest of the three, almost a keeper. All of the fish were super stout.

    nic-habeck
    Lake Mills, WI
    Posts: 831
    #1160247

    Not too many people out in am, must be cause it was frigid…. Fished from 7a-12p caught 3. One just over 20″ and two around 25″, did not get a good measure as bump board only goes to 19″. Water temp between 37 and 38 most of morning. Caught all fish in straights just downstream from dam pond area. Small shallow current breaks produced all fish on charteuese rings. Could not buy a bite on other plastic or colors. Only saw one other sauger caught where lake delton blew out, guys were vert jigging minnows. Had to quit when my lab was shivvering, by the time we got home sun was out. Go figure. I’ll b back!

    nic-habeck
    Lake Mills, WI
    Posts: 831
    #1127403

    North or South end? Drove by the lake yesterday on the Drumlin when snowmobiling, quite a few people out on the lake. Planning to hit it next weekend, probably be an ice rink with warm weather and rain forecast.

    nic-habeck
    Lake Mills, WI
    Posts: 831
    #1120926

    MM needs to grow a pair and send Crosby packing.

    nic-habeck
    Lake Mills, WI
    Posts: 831
    #1119028

    Must Have: Fueling Access Doors, Multiple In floor tie loops, spare tire mount and tire inside, led lights in/out. Lots of nice trailers out there, always had tritons myself, but never a v-nose.

    nic-habeck
    Lake Mills, WI
    Posts: 831
    #1114789

    Both sleds ready to go. One up for sale in classifieds if anyones looking. Got an early xmas present from santa. Leftover 2012 Polaris 600 Rush on the way! Should be a nice upgrade. Bring on the cold, then the white stuff.

    nic-habeck
    Lake Mills, WI
    Posts: 831
    #1100117

    That kind of speed may even make a bass guy

    nic-habeck
    Lake Mills, WI
    Posts: 831
    #1099368

    Launch point not important will be traveling from Madison.

    nic-habeck
    Lake Mills, WI
    Posts: 831
    #1097570

    Waste of time and money…But good luck. Tried it last year I fish outside of the hut too much.

    nic-habeck
    Lake Mills, WI
    Posts: 831
    #1097568

    Painfull loss today. Crap weekend for Wisco ball.

    nic-habeck
    Lake Mills, WI
    Posts: 831
    #1092777

    Speed on mx2025?

    nic-habeck
    Lake Mills, WI
    Posts: 831
    #1091782

    Nice work had some friends fishing it, they did poor.

    nic-habeck
    Lake Mills, WI
    Posts: 831
    #1091439

    Sign me up for one. Finally the perfect craft for bago and the bay. Any pictures of the cockpit and seating arrangement.

    nic-habeck
    Lake Mills, WI
    Posts: 831
    #1045823

    Water temp means nothing when you are unconscious, or have been run over repeatedly by your own craft due to not wearing kill tether. As much time as all of us spend on the water, we will likely encounter a situation once in our lifetime where these items will prolong it. Make it a habit to at least wear on plane, and work towards wearing it all of the time. Glad to hear you guys are ok, reading stuff like that puts a knot in my stomach.

    nic-habeck
    Lake Mills, WI
    Posts: 831
    #1039948

    3ft of 20lb florocarbon for pike, or 10lb floro for eyes. It seems light to many, but for some reason my flags go up more than others I fish with.

    nic-habeck
    Lake Mills, WI
    Posts: 831
    #1038967

    Had mine out for about 40 hours, new to me this winter. Addicting is a good word for it. Unbelievable tool for fishing cold front fish, as I experienced last weekend.

    nic-habeck
    Lake Mills, WI
    Posts: 831
    #1035726

    Match the hatch. I do like white if sight fishing, helps to put the bait on the spot.

    nic-habeck
    Lake Mills, WI
    Posts: 831
    #1035724

    Suprised I’m still awake the whole thing has been a sleeper even the commercials. Good thing for my good ole Sunday standbye of my ipad and fishing websites.

    Going to sure miss the NFL until next year.

    nic-habeck
    Lake Mills, WI
    Posts: 831
    #1035633

    Agreed on mapping with internal antenna. Would finally sell the vex for that.

Viewing 30 posts - 1 through 30 (of 718 total)