Forum Replies Created

Viewing 12 posts - 1 through 12 (of 12 total)
  • Jeff Tawney
    Posts: 16
    March 5, 2021 at 2:54 pm #2020088

    I use a chunk of 12 GA Romex. It is stiff enough that you should not have to pull the throttle access plate.

    Jeff Tawney
    Posts: 16
    February 10, 2019 at 7:12 pm #1834257

    we catch those same fish all year. you should consider doing an open water show in june.

    Jeff Tawney
    Posts: 16
    October 30, 2018 at 8:41 am #1806633

    I’m Running a 19.5 P on a 17 model. I can get to 5800. Another guy with the same boat here in Mi went with the 19P he can get a little more out of his. The ride is much improved with these props. I left the motor height the same.

    Jeff Tawney
    Posts: 16
    August 2, 2018 at 1:28 pm #1789194

    I have a 2017 WX 2060 with the same issue. I have another transducer mounted to the back so it is not a real big deal for me. What is odd is I can see where someone had mine glued down in a different spot. I have never had much luck with glassed in transducers.

    Jeff Tawney
    Posts: 16
    July 2, 2018 at 1:02 pm #1783574

    Just wanted to give an update now that I have 20 hrs on the Motor.

    With the 19.5 P Bravo 1 LT.

    2 people full load, 56 MPH at 5800 RPM. I would order the 19P if I were to do it over again. I still need to try this prop with the motor raised 1 hole.

    This prop has much more bow lift the the stock 3 blade. Slow planing speed at around 19MPH. Good hole shot even with a full live well and 4 guys in the boat.

    Jeff Tawney
    Posts: 16
    April 9, 2018 at 11:03 am #1766251

    I finally was able to get out yesterday. After I properly broke in the motor, Here are the results with the 19.5P Bravo 1 LT.

    2 guys, 3/4 tank of fuel, Full of gear.
    51 MPH at 5200 RPM. Great hole shot and slow speed plane (20 MPH). This prop seemed a touch squirrely at full trim.

    Jeff Tawney
    Posts: 16
    March 14, 2018 at 12:33 pm #1759588

    Nick,

    Please post some pictures if possible.

    I picked up a left over 17 model. I also have been impressed with the attention to detail these boats have. I found the same thing when i wired up my 9″ and 12″ Hummingbird Helix graphs. The dash is over 1/2″ thick on these boats.

    Jeff

    Attachments:

    1. 20180130_1836371.jpg

    Jeff Tawney
    Posts: 16
    March 12, 2018 at 11:08 am #1758872

    I ended up ordering a 19.5 pitch Bravo 1 LT. I will post the results after the weather breaks.

    Jeff Tawney
    Posts: 16
    March 9, 2018 at 6:05 am #1758351

    What pitch are you running on your Bravo 1?

    Jeff Tawney
    Posts: 16
    January 22, 2018 at 6:48 pm #1746544

    I just got 11.5 pulling my wx2060 for the first time, 2015 Ford F150 supercrew 3.5L ECOBEAST. All 75mph hwy.

    Jeff Tawney
    Posts: 16
    January 22, 2018 at 6:43 pm #1746540

    I just picked one up as well. These boats are built like a tank!

    Attachments:

    1. 489301.jpg

Viewing 12 posts - 1 through 12 (of 12 total)