Forum Replies Created

Viewing 16 posts - 1 through 16 (of 16 total)
  • gscrsigs
    Posts: 40
    #445549

    My two cents would be stay away from Warners Dock in New Richmond WI.

    gscrsigs
    Posts: 40
    #431838

    Yellow sign and very small bathrooms? Office to the left when you get up the hill and one buiding with front and rear rooms? I believe there is a garage below as well for fish cleaning? That sound like the one you are talking about?

    gs

    gscrsigs
    Posts: 40
    #430900

    The bullet head swims as good as any other I have thrown. Reduce your skirt strands and use a standard hook other than the wide gap and they run very true. The eagle claw l221 is a cheap strong hook but seems to rust quickly in the box. Spend the few extra bucks on a mustad and your on your way. You can make the bullets up to 7/8 and as low as 1/4

    gs

    gscrsigs
    Posts: 40
    #430218

    Is there anyone that has some chips for sale that are used or are thay not worth buying because they dont have enough detail.

    gs

    gscrsigs
    Posts: 40
    #426225

    Give me a PM if you do buy new and decide to shop at Warners Dock . I would like to give you my opinion and exsperiences with them and can steer you to some dealers that will treat you rite.

    gs

    gscrsigs
    Posts: 40
    #424417

    Thats to funny!! I wrote the previous reply and then went in to watch more coverage, if you watched like I did they referenced Mike to Dennis rodman as well.

    gs

    gscrsigs
    Posts: 40
    #424412

    Like him or not after spending three days following him as a camera boat for ESPN on Wissota and hanging out with him afterwords, the guy is a genious. I know like most on this site that getting support and recognition in this sport is very emotionaly draining. This guy can get all the coverage that is needed and expected by sponsors without having a good day, thats why he has what he has. He is a product of what is exspected to keep the sponsorships rolling in. The pole he broke off will prbably be worth 100k on ebay someday and he will end up finishing last in this classic. The fishing and catching is actually the easy part in this sport, its getting the support to be able to be in enough events to show case it, thats the tough part. I was not star struck and support him because I spent time with him, rather impressed that he can turn it on and off to be able to steal the spot light when needed, yet be a very average guy that is great with the youth and the guys that envy him . I’m nuts, not Ike nuts, but could be to be in his position. Dennis Rodman could only rebound but look what he did for himself, not including CARMON ELECTA, by getting the attention. Like him or not, I just take it for what it is.

    gs

    gscrsigs
    Posts: 40
    #393257

    Lost the pics of the 6-10 I caught the same day

    gscrsigs
    Posts: 40
    #370410

    There really is not a bad place on the lake to catch a ski. I bass fish tournaments out there and jiging the deep weedlines almost always produces one or two. the landing bay is full of muskies in the 5 ft. weeds as well. You will see many while fishing but those will not bite. Fish are not huge but a good number of them can reach the mid forty’s. Nice thing is that a guy can boat a good number of them in a day then head to bone and hit the humps and points to put a few more in the boat.

    Gs

    gscrsigs
    Posts: 40
    #353277

    I would definatly check and actually pull out the resevoir to clean. Even if the chunks were gone it will be worth knowing. Amsoil has a base that is totaly different than any other oils. It in turn shows some great qualitys but also has the possibility of coagulating. We did speek with amsoil and my take was that they could have showed much better customer service especially with the fact that they new their was some of that coaglating oil out there. The guy that blew up still runs it though but really pays attention to his pours. Personaly they lost me on the service end. Not telling anyone to stay away just my opinion. I guess I just put alot of stock into how a company stands behind issues that will come up, ” nobodys perfect” and I understand these things. I will also say that everybody else could have had great customer service and thats great, I’m not bashing, hopefully everyone pays attention to all oils that get poured into our exspensive toys.

    gs

    gscrsigs
    Posts: 40
    #353217

    Something to remeber about amsoil though and it saved me by knowing is that it can coagulate and plug up injectors. It happened to my cusins motor leaving it blown up and I the next year was pouring in some amsoil and saw some small chunks to find out that it was coagulated as well. It does have a lot to do with the age but we as consumers don’t know how old some of this stuff is. I pulled out my resevoir, which was a pain, and drained and cleaned out the chunks, but did not blow up. Just watch as you pour and I would say that it would be a good idea with all oils.

    gscrsigs
    Posts: 40
    #334599

    If you end up landing any more sponsors please let me know what the secrets are. I have a great resume and a lot to offer but find the whole sponsorship ventures to be the hardest thing I have ever done year after year. The wind has been taken from my sail in every way possible. Its so emotionaly straining that I almost dont think its worth the effort and I have a resume that should do my speeking for me. I had to respond because you are rite, its not that far away and the more resumes you have spread out there the better chance you have to get lucky on one.

    gs

    gscrsigs
    Posts: 40
    #332803

    Still looking for someone to manufacture some of my new products.
    First come first serve, this needs to get rolling before someone else comes up with these products.We do have a prototype of one of the products.
    thanks
    gs

    gscrsigs
    Posts: 40
    #331473

    Anybody know of any honest companys that have the capability to develop My products?
    Really need to get together with someone to get the ball rolling.
    thanks
    gs

    gscrsigs
    Posts: 40
    #330785

    Is there any company’s in the upper midwest that would be interested in producing and owning the rites to a couple of great ideas and trade markable names. I just don’t have the time and would rather supply the help in the design and marketing.
    Kwkfsh I never did get a PM from you. These products will either make the rich, richer, or help a company out that wants to get on the map. This is going to be a first come first serve information. I will just need a form signed that My ideas won’t be stolen and the information will be shared. I want to get this thing rolling for the spring opener which should not be a problem at all.

    george

Viewing 16 posts - 1 through 16 (of 16 total)