Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • gourmetpru
    Wisconsin
    Posts: 3
    #1171916

    Hi guys. I figured the problem. The 522i on the bow needed a software update. The current version was 1.0. I needed the 2.5 upgrade which allowed for the 2 units to share the same screen. My first attempt at download to a SD did not work, but I found out that if the SD card is High Definition it will not work so I will have to find a non-HD card or see if I can get a marine electronics store to download it for me.

    gourmetpru
    Wisconsin
    Posts: 3
    #1171260

    There is no feature on the sonar menu called “Sharing” There is one called “Network Sonar” I did check this but still get no image on my bow mount LMS 522igps unit. Still searching for answers. Thanks to anyone with an idea.

    gourmetpru
    Wisconsin
    Posts: 3
    #1170579

    I have a similar problem. I have an HDS 7 Gen 2 Touch on the Console and an LMS 522igps on the bow. I hooked up the ethernet cable but can’t get any image on the 522 from the console. Do I have to go into each unit and change some setting? Any help out there. Thanks

Viewing 3 posts - 1 through 3 (of 3 total)