Forum Replies Created

Viewing 30 posts - 1 through 30 (of 55 total)
  • gillman
    red ming mn
    Posts: 83
    #809578

    some guys get the good ones.hope you have 30 more.

    gillman
    red ming mn
    Posts: 83
    #755474

    total weight 34 lbs big fish 11.5

    gillman
    red ming mn
    Posts: 83
    #514549

    my boys works fine.

    gillman
    red ming mn
    Posts: 83
    #412005

    That is the way me grandfather showed me back in the sixtys it works great in shallow and fast moving water to get your bait down on bottom. the one thing I do diffrent is use a leader where he tied directly to the lead line. sone old river rats still do.

    gillman
    red ming mn
    Posts: 83
    #411998

    I have run both and found no noticable diffrents in the way thay run.but I run it in 15 feet and less so I dont know how it would work in deeper applications.

    gillman
    red ming mn
    Posts: 83
    #411417

    put mine away it keeps going in safe mode and shows no oil had two new codes put in it but still does it.but when the temp is above 35 I have no problems other than that. with over 200 hours on it.

    gillman
    red ming mn
    Posts: 83
    #408326

    thanks for the comeback guys and it is electric start.I would type more but this took me 20 min!

    gillman
    red ming mn
    Posts: 83
    #390464

    Bought two in sept one for each of my boys. great starter guns for them.and lots of fun for me as well.

    gillman
    red ming mn
    Posts: 83
    #337500

    thanks for the info guys.

    gillman
    red ming mn
    Posts: 83
    #330366

    I bought a set two years ago from whitecap best sevice and deal you will ever get!!!!

    gillman
    red ming mn
    Posts: 83
    #326122

    I have over 80 hours on my 40 E-tec and have had only one problem–when they rigged it they pinched the gas line in the motor casing. It took a few days on that but thats not a motor problem. My motor also turns over when its in gear and will not start. Good thing that it does not. After a couple of times doing that you learn to check to put it in neutral. I have to say that I am very happy with the performance (gas and oil use)of my E-tec.

    gillman
    red ming mn
    Posts: 83
    #322767

    I troll the backwaters alot so i run 27lbs with a 310 gti penn holds 8 colors. on the lake I use the 320 gti with 10 colors.along with a three foot leader on all my leadline rods.

    gillman
    red ming mn
    Posts: 83
    #319502

    Had vinyl in my boat first year.put carpet in second year best move I made no more slipping cuts or edges curling up and looks great. dark grey hides every thing

    gillman
    red ming mn
    Posts: 83
    #315468

    I have been using north lake launch with no problem.just go down the shore line past the island then angel straight for the slought.

    gillman
    red ming mn
    Posts: 83
    #313849

    thanks guys

    gillman
    red ming mn
    Posts: 83
    #309621

    like chappy said theeeeere great I bought the 40 this spring and I have nothing but good things to say. see you on pool 3

    gillman
    red ming mn
    Posts: 83
    #306826

    try twin citys outboards all used parts on any moter you can think of.

    gillman
    red ming mn
    Posts: 83
    #305106

    upper pool 4 not a bad day drifting crawlers on jigs.

    gillman
    red ming mn
    Posts: 83
    #303471

    I have the 40 e-tec and it is the real deal its quiet and has lots of power. had it out this past weekend 5 hours of steady running and used not even 3 gallons of gas.I have a total of 20 hours on it.

    gillman
    red ming mn
    Posts: 83
    #301468

    bringing mine in this week for its check up. Iam very pleased with my 40 e-tec all i wanted and more. having a tack put in to fined the sweet spot for gas use.

    gillman
    red ming mn
    Posts: 83
    #297087

    I allso had a 6 foot rod box.what i did was cut one end out then cut out the side of my front bench fit them together and had a 7+ rod locker.

    gillman
    red ming mn
    Posts: 83
    #295924

    I like to use flora-carbon for my leader.i have lost very few lures with it and catch rate is the same as mono and braids.zebra mussels dont cut it up as bad.

    gillman
    red ming mn
    Posts: 83
    #295647

    chappy 40 e-tec how has your gas comsumption been is it better with the 17 pitch. and hows it running?

    gillman
    red ming mn
    Posts: 83
    #295180

    very cool

    gillman
    red ming mn
    Posts: 83
    #293861

    JONH call ken at smittys trust BILL you will get the best deal on your trade from ken.

    gillman
    red ming mn
    Posts: 83
    #290373

    just used my deep fryer tonight made beer batter walleye and there is nothing better on a cold winter night.my boys like it so much Iam lucky to get any fish. better hide a little when I cook it.

    gillman
    red ming mn
    Posts: 83
    #288151

    guys does that include tiller handle.the quote i got was with it becouse its a option not standard?

    gillman
    red ming mn
    Posts: 83
    #288106

    Thanks Chappy do you happen to have a phone number to call them?

    gillman
    red ming mn
    Posts: 83
    #288097

    From what I read there prefomance sounds great but like HERB i will wait and see if the bugs are worked out. I did check with a dealer on the price and a 40 tiller rounds around 5500 550 just for the tiller handle little high

    gillman
    red ming mn
    Posts: 83
    #285622

    sign me up

Viewing 30 posts - 1 through 30 (of 55 total)