What are the price ranges for the jersey

I talked to Charger directly and they suggested that I go to a Tempest Plus 14 5/8 x 25. I should run that between 5600-5800 and when they tested with that porop they got 69-70mph GPS. I also talked with the Turbo Prop Dealer and he suggested a 14 3/4 x 24. I am trying to find somewhere that will let me try one out before I buy it.

Sorry, the buildup is on my motor not in my motor.

Thanks Wade. I just saw that as i was scrolling down. Pretty popular question. Appreciate the response.

Hey guys. I had to plug the Transducer in to get it out of simulator mode. Everything is working fine. Thanks for all the help.

Thanks for all the suggestions. All i had to do was turn the screw on the manual relief valve. That allowed me to lower the motor. Then the trim started working after i tightened the relief valve back up. Everything is well.

I forgot to mention. I have the unit wire into the fuse box. Lowrance had me go into “Overlay Data” and display my voltage on the unit. I am getting anywhere from 10.9-11.3v. They said it should be around 12

I talked to Lowrance at the end of last week and they told me that it may be interfereing with the Humminbird I have on the console. They told me to turn off the Humminbird and try the Lowrance on the bow by itself. It seem to fix the problem. Although it seems strange to me that my buddy, whom I bought both units from, could have the exact same setup as myself with the exact units and be able to use them at the same time. I have been on several boats where people run both sonars and have no problems why me?
To answer your question I have a new skimmer on the trolling motor. I get a bouncing read if the console unit is on. If I turn off the console unit it works perfectly. The trolling motor doesn’t seem to effect it.