I have used rocky mountain atv and hyperparts.com they were the cheapest for axle seals and cv boots when i needed them.

The only problem i have is a little rough idle. The local boat dealer told me to use yamaha ring free. I think i will just use the sea foam.

i bought mine online but the other day i was in the store and it was the same price

thanks for the replies i did go with the 798 just have to get it hooked up now and get on the water.

they are both 500 at gander mountain

sent you a pm

not sure on your model but on my dads caftsman the key has two different running positions. you have to be in one our the other for it to cut in reverse.

tw 20.6
sauger 3.1
walleye 8.4

Thanks for all the help i will be getting the part tomarrow and hopefully its the last thing to fix for a while.

if i tested that right the tps is .75 to 3.65 so the tps should b good or am i wrong?

thanks for the help so far. I cleand the tb i sprayed bake clean every where and it does not change. the throttle is not sticky. one thing is if i unhook the battery for a while then hook it back up and start it it will idle like it is suppose to untill i step on the gas then it stays at a high idle.

bag=20.1
big fish=4.8

im in

Thats not even the whole story they also had there children removed from the home. and there originally from illinois

my brother just bought one on friday and as soon as he engaged the deck the whole tractor just shook so he called sears back and the had him call the tech line because they have been having alot of problems with then deck. the tech came out tuesday and said the whole deck has to be replaced and theyll have one next week.

This is what i found of the wdnr site hope it helps.

FEEDING DEER:
Amount: No person may place or allow the placement of more than 2 gallons of feed material at any feeding site.
Placement: No person may place or allow the placement of:
• More than 2 gallons of feed for each owner-occupied residence or business, regardless of property size.
• A deer feeding site more than 50 yards from an owner occupied residence or business.
• A deer feeding site within 100 yards from a roadway having a posted speed limit of 45 miles per hour or more.
• A deer feeding site without the approval of the owner of the owner-occupied residence or business.
• Feed at a deer feeding site that the person knows is being used by bear and elk. If the owner of the residence or business is notified by the department or otherwise
becomes aware that bear or elk have been using a deer feeding site, the owner must discontinue feeding for a period of not less than 30 days.
Content: No person may place any bait or feed material for deer that:
• Contains any animal part or animal by-product.
• Is contained in or deposited by a feeder that is designed to deposit or replenish feed automatically, mechanically, or by gravity.

the guy from pats is going to work for agusta meats in january. they make some good meat there.

Rear window has unauthorized sign, poster or other nontransparent material 346.88(3)

This is what is stated on the dots website so your sticker is just fine just take the vehicle to the office of whoever wrote the ticket and im sure they will take care of it.

I should of added that ive checked for leaks tryed a differnt cap and wires are all right.the thing that is wierd about this is that the missing comes and goes it seems to miss for 2 3 days then clears up and rungs good for 2 or 3 days. i have talked to mechanics that i know and there boggled by how it can come and go like that.

that must be a local ordinace. I have never heard of it hope the idea doesnt spread.

i see on the news that there was a sixth deer ran over and the kid took it home and butchered it and gave it to his mom.

Thats what im hearing from a couple area mecnanics is that its the fuel pressure regulator leaking. I might try that and see if thats it. Thanks for all the replys.

its weird im thinkings it is the gas but i have asked three other people and they say there still getting the same mileage. so im at a lost i guess.

I do let it warm up a little but i dont think it should be hurting the mileage as much as it is. I did have a code in it last summer wich was the second bank o2 sensor. we cleared that code and it has not come back on. some one told me that the vortex has to run right at 190-195 our it will get bad mileage. I have put three thermostates in to get it to run hotter but the gauge still reads undet that so i think its just temp switch out gauge not reading right.

the guy bought the land and pays his taxes as long as he did every thing within the law he should be able to do what he wants. and every thing you say you do on that land seems to be for your own gain. do you help the guy out with work he needs done around there?

my brother has the black one and loves it. first time out using it last year he put a doe down at about 120 yards. nice gun and cheap price.

that sucks i hope the guy lets him in. unfortunatly in wisconsin landowners dont have to let you in and the warden or county sherrif cant do any thing about it. that is deffinetly one law that should be changed.

here is another photo i found on a different site.

Thanks everyone in one way i would of liked to hunt the rut but now it looks like alot of fall walleye fishing for me. I figure on trying for some does in october when theres cooler weather unlike this week. its not right to be sweating while trying to gut a deer.

thanks for the tips i tried system restore and it didnt work so i completly uninstalled msn and reinsalled and it work so it must have been corrupted or something.