Forum Replies Created

Viewing 19 posts - 1 through 19 (of 19 total)
  • cjhenry01
    Member
    NULL
    Posts: 19
    February 5, 2014 at 4:28 am #1386036

    Quote:

    Quote:

    Dean or anyone else, what are we looking at for an approximate price for the wx2060 with the offshore 250, T9.9 kicker, 80lb Terrova, etc.
    $50,000?

    Any updates on the 2014 wx19??

    Boat show special on the WX2060 w/ 250 offshore, terrova, cover, keel guard, 4th seat and remote kicker control(separate throttle at counsel) was $57k and some change. I believe the remote kicker option is $800.

    $57k ouch!!! That’s a bit more than I want to spend. I may just have to wait for the new WX19?? or order the current WX1900. I really would like to order the new WX19?? before the apr financing special runs out at the end of March and also have it in my possession by early summer.

    cjhenry01
    Member
    NULL
    Posts: 19
    February 3, 2014 at 7:03 am #1385363

    Quote:

    Sounds like mid summer is the target production and will be a 2015 model yr as of today…. perhaps sooner!

    That stinks I really wanted to place an order by the end of March and I don’t think I can swing the $$ for the WX2060. Do you think the new WX19?? is really going to be that much better than the current WX1900? I’m assuming the new one will have the better keel, have a max rating of 200 but will more than likely be heavier than the current WX1900?

    cjhenry01
    Member
    NULL
    Posts: 19
    February 2, 2014 at 4:43 am #1385110

    Quote:

    Quote:

    Quote:

    Quote:

    What is the overall length of the wx2060 with the 250 yammy hangin’?

    Anyone? I need to know if I can fit this puppy in my garage. Total overall length from tip of trailer tongue to the farthest point of the yammy 250?

    Its going to take 25′-9″ + from the rear wall to the struts on your overhead door to fit this baby in. A smidge over 24′ if you swing the tongue.. With the new windshield, Im pretty sure it will go under an 84″ high opening, but its gonna be squeaky tight.

    Thanks! That sure is a beauty!

    What about the widest point? Is it the trailer width or is the boat wider when on trailer?

    cjhenry01
    Member
    NULL
    Posts: 19
    February 2, 2014 at 4:37 am #1385109

    Quote:

    Quote:

    Quote:

    What is the overall length of the wx2060 with the 250 yammy hangin’?

    Anyone? I need to know if I can fit this puppy in my garage. Total overall length from tip of trailer tongue to the farthest point of the yammy 250?

    Its going to take 25′-9″ + from the rear wall to the struts on your overhead door to fit this baby in. A smidge over 24′ if you swing the tongue.. With the new windshield, Im pretty sure it will go under an 84″ high opening, but its gonna be squeaky tight.

    Thanks! That sure is a beauty!

    cjhenry01
    Member
    NULL
    Posts: 19
    February 1, 2014 at 6:17 am #1384968

    Quote:

    We will be meeting with the folks this week from HQ. Will try to get you an update for this new boat!

    Any updates on the new 19′?

    cjhenry01
    Member
    NULL
    Posts: 19
    February 1, 2014 at 6:16 am #1384967

    Quote:

    What is the overall length of the wx2060 with the 250 yammy hangin’?

    Anyone? I need to know if I can fit this puppy in my garage. Total overall length from tip of trailer tongue to the farthest point of the yammy 250?

    cjhenry01
    Member
    NULL
    Posts: 19
    January 29, 2014 at 8:20 am #1384173

    What is the overall length of the wx2060 with the 250 yammy hangin’?

    cjhenry01
    Member
    NULL
    Posts: 19
    January 23, 2014 at 3:46 pm #1382273

    If I can get nearly the same mph and better mpg with the new wx19?? w/F200xb&T9.9 and save approximately 10 grand, I would say it’s worth the wait.

    cjhenry01
    Member
    NULL
    Posts: 19
    January 23, 2014 at 7:40 am #1382050

    So you think the 250 with the turbo 21p prop would be a better fit and would get a little more out of it?

    I really don’t see why the 300 isn’t an option for the wx2060. If I’m going to spend 60k on a boat it better do 60mph. Just sayin’!

    cjhenry01
    Member
    NULL
    Posts: 19
    January 23, 2014 at 4:29 am #1381997

    Wow, that’s a lot slower than what I was hoping for.
    I wonder if the new wx19?? with the F200 and T9.9 will be any quicker?

    cjhenry01
    Member
    NULL
    Posts: 19
    January 22, 2014 at 8:34 am #1381716

    Dean or anyone else, what are we looking at for an approximate price for the wx2060 with the offshore 250, T9.9 kicker, 80lb Terrova, etc.
    $50,000?

    Any updates on the 2014 wx19??

    cjhenry01
    Member
    NULL
    Posts: 19
    January 19, 2014 at 7:12 am #1380840

    Between the wx2060 and the new wx19?? Where would the difference in length be applied?
    Is it just in the bow?
    If so, I would wait and would be happy with the 19?? because I prefer the size of the cockpit on the new 2060.
    Where do they usually apply the additional length between boats of these two sizes? Bow or overall?

    cjhenry01
    Member
    NULL
    Posts: 19
    January 16, 2014 at 7:45 am #1380184

    What brand of keel guard is that?
    Any updates on a ski tow bar option?
    Where did the bow step up cooler go?

    Also, approximately what would the cost difference be between the new WX2060 with an offshore 250 and the new WX19?? with an F200? Both with hydraulic steering and most all other options would be the same. I’m just looking for a ballpark. Thanks!!!

    cjhenry01
    Member
    NULL
    Posts: 19
    January 10, 2014 at 5:22 pm #1378938

    Thanks Eric. I hope the WX2060 has the skeeter ski tow bar option but if not this looks like a really good removable system. Does the turbo swing mount to the same place the standard E-ladder does?
    If so, do you think they could work together?

    cjhenry01
    Member
    NULL
    Posts: 19
    January 9, 2014 at 10:58 am #1378553

    Is the actual boarding ladder foldable considering it’s not retractable?
    I can’t find pic’s of it anywhere on the internet.
    If the WX2060 doesn’t have the option of a ski tow bar and I elect to add the actual boarding ladder, I may be able to ditch the stock e-ladder and mount a removable Turbo Swing in it’s place as from what I understand the Turbo Swing brackets mount to the motor mount???

    cjhenry01
    Member
    NULL
    Posts: 19
    January 9, 2014 at 8:54 am #1378509

    I see the new WX2190 doesn’t have a ski tow bar option but both the MX1825 and MX2025 do. Please tell me the new WX2060 will have a ski tow bar option?

    I also see there is a retractable boarding ladder for the WX2190, MX1825 & MX2025. Is this an actual boarding ladder or is just an E-ladder as I’m assuming the same ladder will come on the new WX2060?

    Sorry for all the questions but I really appreciate all your help.

    cjhenry01
    Member
    NULL
    Posts: 19
    January 8, 2014 at 3:58 pm #1378360

    Thanks for the reply.

    ETA for the 18-19′ model?

    Also, any ideas on the hp rating of the new 18-19′ model?
    225?
    250?
    Or 200 max?
    I would love a 19′ WX with the new “React” keel that I could mount either an offshore f225 or f250 on. This would be my ideal fish/family boat.

    cjhenry01
    Member
    NULL
    Posts: 19
    January 8, 2014 at 11:02 am #1378202

    Any idea why it’s not rated for a 300hp motor when the MX2030 is most likely a lesser weight?
    Thought’s on speed of the 2060 with the Yamaha offshore f250?
    Also, are there any plans for a WX in the 18-19′ range with the react keel.
    I’m going to be ordering a Skeeter soon and would like to know if I should hold off a little while.
    I’ve also heard that Yamaha will be changing the f150 over to the offshore platform???
    Thanks!

Viewing 19 posts - 1 through 19 (of 19 total)