Forum Replies Created

Viewing 30 posts - 1 through 30 (of 50 total)
1 2
  • Bryan Shelton
    Posts: 69
    July 6, 2020 at 8:23 pm #1955054

    I was looking at Templar. I will give them both a shot.

    Bryan Shelton
    Posts: 69
    June 27, 2020 at 10:34 pm #1953131
    tomr wrote:

    Just got back from Kabetogama and the <strong class=”ido-tag-strong”>walleye fishing was very good as long as the wind was blowing, lots of 20″+ fish. No giants but a lot of fun. Did not try smallmouth fishing but seemed more people fishing smallmouth than walleyes and the guys I talked to said they were doing well. Did catch one day about 15 SM trying for <strong class=”ido-tag-strong”>walleyes but they were all not very big. Beautiful lake lots of resorts.

    I will check out Kab as well. Good hear you caught plenty over 20”.

    Bryan Shelton
    Posts: 69
    February 13, 2019 at 7:06 pm #1835237

    Thanks for the ideas. I will look into them!

    Bryan Shelton
    Posts: 69
    August 24, 2018 at 11:16 pm #1793644

    Yeah, after further research looks like the name is American Green Tree Frog. I didn’t see it listed as in the frogs of Iowa page.

    Bryan Shelton
    Posts: 69
    February 26, 2018 at 3:49 pm #1755358

    Thanks for the advice guys. I might have to pick some up.

    Bryan Shelton
    Posts: 69
    February 26, 2018 at 1:10 pm #1755303

    I cleaned them up already. They made nice little fillets. They are for sure yellow bass. Clear Lake here in Iowa is full of them! I didn’t see a big blood line though…

    Bryan Shelton
    Posts: 69
    February 26, 2018 at 11:08 am #1755249

    I will give them a shot. Everyone says they a great eating.

    Bryan Shelton
    Posts: 69
    February 26, 2018 at 10:29 am #1755232

    Thanks for the info. I like the price of the 5 better but I’m sure I would like the 7 more. I might have to go play with one at a store in demo mode.

    SuperDave1959 wrote:

    My neighbor has one and the images seem very sharp/clear. He has the 7″ model.

    Bryan Shelton
    Posts: 69
    February 25, 2018 at 9:18 pm #1755140

    I have a 1675 Impact with a 90hp Merc. Plenty of Power. I have had it fully loaded with gear and four men all over 200-250 and got it up to 42 mph. You will really like the combo! Congrats on the boat

    Bryan Shelton
    Posts: 69
    February 25, 2018 at 8:14 pm #1755121

    $70 is pretty pricey.. is it just a regular cotton sweatshirt?

    Bryan Shelton
    Posts: 69
    February 25, 2018 at 3:10 pm #1755064

    That looks delicious! Hope the weight loss journey is going well for you and the wife!

    Bryan Shelton
    Posts: 69
    February 24, 2018 at 7:22 pm #1754922

    I haven’t narrowed down a certain Lodge. Why do you recommend that one?

    Bryan Shelton
    Posts: 69
    February 18, 2018 at 2:37 pm #1753289
    milemark_714 wrote:

    I got three for spares,and a set of blades.Just in case.That was 3 years ago.

    Have you had to change the blades or send them in for sharpening yet?

    Bryan Shelton
    Posts: 69
    February 18, 2018 at 1:30 pm #1753275

    I thought I would send an update on my repair. I put the new piece on this afternoon. Super easy process. As good as new.
    I might buy a few replacement pieces and have at the house just in case.

    Bryan Shelton
    Posts: 69
    February 13, 2018 at 2:59 pm #1752060

    Not sure why my thumps up turned into ? But I’m happy with the service!

    Bryan Shelton
    Posts: 69
    February 13, 2018 at 2:58 pm #1752059

    The part arrived today over lunch. 24 hours after speaking on the phone! ????????????????

    Bryan Shelton
    Posts: 69
    February 13, 2018 at 7:18 am #1751900
    oldbear wrote:

    Glad they’re taking care of you Bryan. Saw your post on the other site to.

    They have been fantastic.

    Bryan Shelton
    Posts: 69
    February 12, 2018 at 1:37 pm #1751734

    Im hopefully it was a defect. Honestly this past weekend is probably the most extreme conditions I will have it in. It was probably below zero with wind chill and over 2 feet off ice. I’m happy with how they took care of the issue and I am looking forward to using it!

    Bryan Shelton
    Posts: 69
    February 12, 2018 at 1:17 pm #1751719

    I just got off the phone with K-Drill. They are shipping a new part out. Good customer service.

    The story…
    I was on about 25″ of ice. I was drilling my second hole. I was about an inch or two done and one of the first pieces broke off. I was a little shocked and disappointed. I am happy with there service and hopeful it was a fluke.

    Bryan Shelton
    Posts: 69
    February 12, 2018 at 11:35 am #1751679

    I was asking if anyone had thoughts of the outcome… right now it’s not an issue. But an expensive auger broke during the first use. I’m sure a lot of guys on here have them, and they do. Guys chimed in saying they have never had any issue which is awesome. K-Drill seems like a great product and I was not bashing them. I get poop happens and I could have gotten a bad one.

    Bryan Shelton
    Posts: 69
    February 12, 2018 at 10:19 am #1751646

    Here are pictures. And yes.. I HAVE emailed the company. I haven’t heard back yet. I may give them a call today.

    I’m not bashing K-Drill at all. poop happens. Everyone I talk to that has hem love them. That’s why I bought it.

    Attachments:

    1. IMG_1958.jpg

    2. IMG_1957.jpg

    Bryan Shelton
    Posts: 69
    February 6, 2018 at 9:34 pm #1750440

    From what I have seen on videos and read on reviews, it looks like a good buy.

    Bryan Shelton
    Posts: 69
    February 6, 2018 at 8:38 pm #1750420

    Thanks. I may have to try a Widow maker. I love the Tickle Stick.

Viewing 30 posts - 1 through 30 (of 50 total)
1 2