Forum Replies Created

Viewing 18 posts - 1 through 18 (of 18 total)
  • Steelers
    Posts: 24
    #1406095

    The rebate only applies if you buy a HDS-10, HDS-8 or HDS-7 Sonar (Head unit) and bundle the structure scan with it. You can’t just buy the Structure Scan by it’s self.

    Steelers
    Posts: 24
    #1394537

    To little to late for this guy. After three Full Throttle wins and poor pay outs I’ll be fishing AIM Weekend Walleye series.

    Best of Luck,
    Jeff

    Steelers
    Posts: 24
    #925295

    Micheals is a nice upscale restaurant. Two blocks east of the Gonda building on center street (center street runs east and west between the Gonda and the Eisenberg building) and Broadway. It can be reached through the skyway system also.

    Steelers
    Posts: 24
    #872571

    I just had the same thing happen to me. I tried Super Glue that’s for plastic. It held for a couple outing’s then broke again. I ended up just ordering a new transducer off Amazon. It was $68.00 (i believe) and they were the cheapest i found. DO NOT splice that cable! My advice order a new one and take the time to run the wire directly to your depth finder.

    Steelers
    Posts: 24
    #811015

    Here is the link to the article in my local paper.

    LINK

    Steelers
    Posts: 24
    #803089

    Take out your mapping chips then start it up.

    Steelers
    Posts: 24
    #753561

    The Chiefs got them for a 2nd round pick (34th over all). Lets see what he can do with the Chiefs offense. He had some pretty good players and coaches around him in New England.

    Steelers
    Posts: 24
    #47437

    Thanks guys, Just got a new pup a 8 month old Vizsla. I’m really looking forward working this dog. Now we just need to lose all this white stuff on the ground and really get down to business.

    Jeff

    Steelers
    Posts: 24
    #604050

    I got mine for 649.96 (that out the door). This was the best price I found, and I called 6 different places. Size of the tire was LT 265/75R+16. I would not put another pair on my truck though, 36,000 miles and they need replacing. Got them at Waynes tire Sargeant, Mn (507)584-6677. Probably a 3 hour drive from Bethel.

    Steelers
    Posts: 24
    #541933

    Steve, I got mine at Greenway co-op in Kasson MN

    Steelers
    Posts: 24
    #541868

    Brian, I will attach a link of some spray I used last fall that worked very well for me. http://www.cattlestore.com/pc-429-57-tempo-sc-ultra-premise-spray.aspx
    After spraying the foundation,doors and windows the next day I had to sweep the dead bugs off my deck. I found this at my local farm co-op and it will take care of all your bug problems including asian beatles. This stuff is the real deal.

    Good Luck, Jeff

    Steelers
    Posts: 24
    #435886

    I use a Back-To-Back Uni-Knot. I found it in Berkley 2006 journal. I will attempt to explain it to you. Overlap lines by about 6 inches and create a loop in one line. Wrap the tag end through the loop five times. Pull the tag end to tighten the knot. Repeat another knot with the other tag end. Lubricate, pull tag ends, and clinch tight. Then pull all four lines to tighten. Trim the tag ends. Hope this helps.

    Steelers
    Posts: 24
    #16054

    Nick, That’s the same price I paid for mine 5 years ago. I also got mine at Scheels (Mankato MN). The neat thing about Scheels is they will hold the gun and let you make payments on it until it’s paid off. I have never had a shell jam. I think its the best shotgun ever made. Well worth the money. I can’t say enough good things about my Super Black Eagle.

    Steelers
    Posts: 24
    #429260

    Nick, That’s the same price I paid for mine 5 years ago. I also got mine at Scheels (Mankato MN). The neat thing about Scheels is they will hold the gun and let you make payments on it until it’s paid off. I have never had a shell jam. I think its the best shotgun ever made. Well worth the money. I can’t say enough good things about my Super Black Eagle.

    Steelers
    Posts: 24
    #420010

    $3.00 for all local channels including a couple of PBS. I’m very happy with Direct TV. I don’t think Dish Network has local channels in this area, at least they didn’t last I checked

    Steelers
    Posts: 24
    #419988

    KM telcom carries Direct TV. They have different packages but for about $56 a month you can get all the fox sport channels, which have a ton of fishing shows on the weekends. Local channels are #10 out of Roch, #6 out of Austin and #3 out of Mason City. I just got done watching the Gopher wrestlers. What a great match! It came down to the hwt. match. That match went to OT and Konrad got the takedown for the win. What a battle!

    Steelers
    Posts: 24
    #418315

    Scott, sent you a PM

    Steelers
    Posts: 24
    #417958

    Welcome to IDA Matt. My two cents are the Yamaha 115 is a great motor. I have one on my 1850 Crestliner fishhawk and have never had any problems, although its a little under powered. It come’s out of the hole great but top speed is only 40mph, that the gps reading. If I had to do it all over I would max it out. You may also want to look at IDA’s classifieds. Lots of great deals in there right now.

Viewing 18 posts - 1 through 18 (of 18 total)