Forum Replies Created

Viewing 30 posts - 1 through 30 (of 147 total)
  • Snagger
    Owatonna, MN
    Posts: 184
    #1741595

    Text me at 507-456-1944

    Snagger
    Owatonna, MN
    Posts: 184
    #1602809

    Both units are sold
    Thanks

    Snagger
    Owatonna, MN
    Posts: 184
    #1602717

    Yes the 7 is still available

    Snagger
    Owatonna, MN
    Posts: 184
    #1602355

    I bought a boat at the 2014 boat show from Nick lacanne.
    2014 t-pro 195 with 200 Yamaha awesome boat
    Nick and the service and the parts man have been second to none.
    I buy him a beer when I see him out and about.
    Thanks again

    Snagger
    Owatonna, MN
    Posts: 184
    #1602352

    Sold the HDS 9
    Still have the 7 for sale

    Snagger
    Owatonna, MN
    Posts: 184
    #1529138

    Do you still have this Trolling motor ?

    Snagger
    Owatonna, MN
    Posts: 184
    #1146609

    I have a 2006 tourney sport 185 and love it. I talked to the President of Alumacraft to have them build me one and he said no. but if they get enough interest they would build some in the near future. I would buy one if they did it in 2014.

    Snagger
    Owatonna, MN
    Posts: 184
    #1044293

    I had one from my x-17 and it works with the hds

    Snagger
    Owatonna, MN
    Posts: 184
    #1021886

    When you refer to blade baits what are some examples?
    Sonars ?
    Thanks for any info.

    Snagger
    Owatonna, MN
    Posts: 184
    #982315

    Nice Fish!
    We just got back Friday, We had great weather and the fishing was awsome.
    We fished Mckinsey bay.
    Did you guys stay up near there ?

    Snagger
    Owatonna, MN
    Posts: 184
    #978876

    We are leaving Today for cherob resort.
    Water level is normal according to the resort owner, ROB.
    Fishing is great.
    Good luck to you guys.

    Snagger
    Owatonna, MN
    Posts: 184
    #946810

    Love the Boat and motor
    Dollars for Dollar hard to beat
    Great storage

    Snagger
    Owatonna, MN
    Posts: 184
    #932522

    Thanks for all the info
    I need to get to the river to take the edge off.
    Jig some WALLEYES

    Snagger
    Owatonna, MN
    Posts: 184
    #922679

    I would like the Alumacraft FORUM.
    Thanks guys great idea

    Snagger
    Owatonna, MN
    Posts: 184
    #922677

    I would give up a normal sonar and GPS for Downscan/sidescan.
    Best money I have ever spent HDS-10 with the LSS1.
    AWSOME

    Snagger
    Owatonna, MN
    Posts: 184
    #881783

    Thanks for the info.
    We are staying at sleepy dogs
    I have fished lac seul — Mckensy bay
    awsome walleye fishing

    Snagger
    Owatonna, MN
    Posts: 184
    #854209

    I checked both wires with a mulimeter and
    yellow had 12.4 volts
    red had 4.5 volts
    I pulled the fuse and cleaned the tabs off with emery paper and got 12.4 v
    Every thing lights up thanks guys

    Snagger
    Owatonna, MN
    Posts: 184
    #854048

    Yes, I have power to both the red and yellow.
    I will double check the fuses are good.
    Thanks

    Snagger
    Owatonna, MN
    Posts: 184
    #853935

    Yes I did hook up the yellow wire.
    I tried both ways no change in results
    Yellow to yellow of HDS unit
    Also I put a switch inline the yellow and connected it to 12v pos

    Snagger
    Owatonna, MN
    Posts: 184
    #849443

    22 lbs 6 oz

    10 lbs 2 oz

    Snagger
    Owatonna, MN
    Posts: 184
    #848359

    Thanks so far for the info.
    I am still trying to understand,
    I see two options to wire these systems —
    1st option is to connect the yellow wires from my two hds8 to each with the LSS-1 yellow wire and run these to a switch and then to 12v pos.
    Second option is to connect the yellow wires from the HDS8 to each other and hook up a seperate yellow wire from the LSS1 to a switch and then to 12v pos ?
    Thanks for being patient I dont want to wreck anything at these prices.

    Snagger
    Owatonna, MN
    Posts: 184
    #598772

    I called Lowrance tech support and this is what I found.LCX110c uses 1.7 amps with the lights on and 1.1 amps without lights. LCX28c uses 1.1 with lights on and 700 milliamps lights off. To compare a X15 black & white uses 850 Milliamps with the lights on and 700 milliamps without lights on. Thanks guys I was just trying to compare color vs black and white. THANKS

    Snagger
    Owatonna, MN
    Posts: 184
    #598034

    I have cabelas brand and Bass Pro brand they both work good. I would suggest getting the ones that are adjustable.

    Snagger
    Owatonna, MN
    Posts: 184
    #589815

    I have a 185 Tourney sport with a 150 yamaha 4 stroke and with my 17 pitch Aluminum prop I get 44 MPH . with my 19 pitch stainless I get 48 mph same conditions.

    Snagger
    Owatonna, MN
    Posts: 184
    #584238

    Good idea. Thanks

    Snagger
    Owatonna, MN
    Posts: 184
    #577949

    Power Pro 10-2 Dia awsome line.

    Snagger
    Owatonna, MN
    Posts: 184
    #574068

    Here is the # I called LEI extras (800-324-0045) and ordered all my connectors for networking my LCX-110 and LCX-28. I had my parts within 4 days. I had to order a red to blue conector also. GOOD LUCK. Cabelas was no help at all, but in thier defence lowrance has mad this way to complex for the average guy.

    Snagger
    Owatonna, MN
    Posts: 184
    #574066

    Call Linda Colt at Lowrance 918-438-8747 she has helped me several time .

    Snagger
    Owatonna, MN
    Posts: 184
    #573704

    Minnkota service # 800-227-6433
    Good luck

Viewing 30 posts - 1 through 30 (of 147 total)