Forum Replies Created

Viewing 26 posts - 1 through 26 (of 26 total)
  • GrouseHead
    Posts: 43
    #874841

    Is the wearing on the outside edge irregular around the tire? I had a similiar issue. The aligment was check and spot on. When I has the tire replaced, I was told it was just a bad tire. Had it replaced with the same brand and have not had the issue reoccur.

    GrouseHead
    Posts: 43
    #804582

    Thanks for the thoughts. I had Rhino lining in my last truck and was happy with it. I went without anything on this truck. Now the topper has removed some of the paint on the rails so maybe it time. Anyone have any experience with the Ziebart(sp??) folks?

    GrouseHead
    Posts: 43
    #792764

    I was told by a yahmmy dealer Ring Free is a waste of money. He suggested SeaFoam. I run a can through with every tank. Haven’t had a problem yet.

    GrouseHead
    Posts: 43
    #778011

    Thanks for all the help. I going to put it in this weekend before hitting the water.

    GrouseHead
    Posts: 43
    #777077

    In looking at my brother in-laws 1800, I think the compartment on the 1700 is larger. At lease the access door is. There is plenty of room in there with the two batteries for a charger. It is just a matter of knowing whats behind the sides. Guess I’ll have to take the fuel tank cover off to be sure. Thanks for all the help.

    GrouseHead
    Posts: 43
    #746786

    Thanks for the info. Never been out of Malmo. How is the public access for one person to launch out of? Parking?

    GrouseHead
    Posts: 43
    #563461

    Probably. last year there was only 85 pairs

    GrouseHead
    Posts: 43
    #560207

    I just changed the oil on my Yammy tonight. Love the motor, but if I was buying again I would go with an e-tec. A lot less maint with the bennys of a 4strk. If you find a used one, take it. That’s my 2 cent.

    GrouseHead
    Posts: 43
    #558260

    don’t let your mother-in-law know your handle.

    GrouseHead
    Posts: 43
    #534884

    Thanks for all the suggestions.

    GrouseHead
    Posts: 43
    #28037

    I would start about 3 mos old. I took my lab to a sporting clays club. Put him on a leash out in the parking lot and slowly moved him closer to the noise. Didn’t spend a lot of time there the first time, but made frequent trips each time spending a little more time at the club getting closer to the shooter. After a couple trips, he didn’t seem to even notice the noise and he would sit within 30 ft of the shooters.

    Just an idea.

    GrouseHead
    Posts: 43
    #519832

    I would start about 3 mos old. I took my lab to a sporting clays club. Put him on a leash out in the parking lot and slowly moved him closer to the noise. Didn’t spend a lot of time there the first time, but made frequent trips each time spending a little more time at the club getting closer to the shooter. After a couple trips, he didn’t seem to even notice the noise and he would sit within 30 ft of the shooters.

    Just an idea.

    GrouseHead
    Posts: 43
    #512192

    Try Ray’s Sport and Marine Grand Rapids. I think you can get it lower than $999.

    GrouseHead
    Posts: 43
    #443796

    I’m good now. Thanks for all your help.

    GrouseHead
    Posts: 43
    #443342

    Thanks, I sent a PM. Waiting to hear back.

    GrouseHead
    Posts: 43
    #443339

    Yes, but I would like to get confirmed before the 5/5 cut-off

    GrouseHead
    Posts: 43
    #442964

    I need a Boater for Mille Lacs. Anyone?

    GrouseHead
    Posts: 43
    #17198

    Buy your fiancé a new vacuum. She’ll let the dog sleep outside.

    GrouseHead
    Posts: 43
    #439919

    Buy your fiancé a new vacuum. She’ll let the dog sleep outside.

    GrouseHead
    Posts: 43
    #380763

    Thanks, I sent him a PM. If anyone else comes to mind, please let me know as well.

    GrouseHead
    Posts: 43
    #418745

    Sorry my question wasn’t clear. Someone above mentioned that they would be coming out with a 9.9 e-tec. What I really wanted to know is if a 9.9 e-tec would be oil injected so that you could run an oil line directly from your big motor oil reservoir to the kicker? I may be mistaken but I don’t recall anyone making a small two-stroke in the past that was oil injected, only pre-mixed models. So if you had a two-stroke kicker you needed to run it from a separate pre-mix tank.

    GrouseHead
    Posts: 43
    #418568

    would a 9.9 kicker be oil injected or would you need a separate tank?

Viewing 26 posts - 1 through 26 (of 26 total)