Thank you.

thanks for the info

i am able to weld aluminum i am out of hastings. what kind of boat is it…the model of boat. and maybe a picture of the slice. e-mail me at [email protected] and i will get you a qoute or see if it is doable.

oh wags…

it sounds like you should order up a carb rebuild kit over time the gaskets disinagrate and while you are at check all of the gas lines. if the are hard and not flexible take them off and go to the hard ware stor and replace all the fuel lines. then you should be set

i chipped my 05 duramax and no longer own it but i used a bully dog chip. with that being said i would go with edge or hyper tech i know people with each programer and both have higher mpg. i know the guy with the hyper tech is getting better milage than the one that has the edge. but it could be the difference in a lifted truck and also the driver. if i would put one in it would be a toss up i guess i would go with which ever was cheaper

sounds like the carbs are pluged up i would pull them out and give them a thurough(sorry bad speller here) cleaning with carb cleaner and a tooth brush. make sure to pull out all the jets and needle and floats. if you are not comfortable doing carbs i can help you out

SOUNDS LIKE A CARBORATOR PROBLEM TO ME ALMOST LIKE THE FLOATS MIGHT BE STICKING I ALSO LIKE THE BULB IDEA I THINK THAT WOULD MAKE SINCE. RIGHT NOW THE REASON THE MOTOR DOESNT RUN CORRECTLY IS BECAUSE YOU HAVE A PERIOD OF TIME WHEN YOU DONT HAVE ENOUGH FUEL.

LET US KNOW WHAT HAPPEND WITH THE MOVING THE BALL. THIS CAN BE FIGURED OUT PRETTY EASILY KEEP US UPDATED

so what is a looper i have never heard of these fish

the next pair of boots you guys buy you should get them 2 sizes big and then your foot is likely to hit a “landmine”
oh yeh and wags i would recomend an 8″ and i would also recomend getting an eskimo they are also a nice auger

i do icce fish…a lot…but it only does so much oh well

this web site sucks…i joined it like a week ago and now i cant get off it and i am wanting to get out more and more. i dont know how much more i can get teased……

i bought the viento when it first came out. i love it its a nice real but honestly the twitchin bar is dumb it is still a nice real but i also just bought a zillion last august and that is my go to real always it is so smooth and well you just need to go and try one…but make sure you got the ching to throw down when you go to try it because if you are like me you will come home with it

i have been thinking of building one for quite some time and what i would do is buy a frame that is finished you can do this at most of the big name shack place like ice castle etc. other wise i would go on the lake and ask some guys with shacks if they minded if i looked at theres. get the basic idea of it and start cuting and welding

thank you for the reference jami