Playing with some ideas to mount 2 Hbirds on my dash.
I would make the adapter(silver part) out of 3/16″ stainless and would be mounted to a Balzout mount with 6″ arm.
Running a Ranger 1880MS
what do you guys think?
IDO » Forums » Fishing Forums » Toys for Big Boys » Outdoor Gear Forum » Will this work? HBird dual mount
Playing with some ideas to mount 2 Hbirds on my dash.
I would make the adapter(silver part) out of 3/16″ stainless and would be mounted to a Balzout mount with 6″ arm.
Running a Ranger 1880MS
what do you guys think?
It might. My curiosity would be around stress with 2 units of that size on one mount. Specifically where the balzout mounts to the dash. That could be a lot of torque in waves.
If you are making the arms just make a 2 bases larger then the blazout base to put on the top and bottom, this will distribute the load better to the dash.
Putting two units on one arm will not give you a lot of adjustability. Your son and you could do an art and craft project and make a mockup one with cardboard so you can see if you like the way it sits. It seems like that is bunch of weight for one arm. If you are going to mount them in like that why not remove the arm and make one fixed mount?
Balzout makes a mount that will accomplish this. Give them a call or email.
I had a conversation with BO and they do have a double arm mount but is quite a bit of $$$$.
I had a conversation with BO and they do have a double arm mount but it’s $400 and i’m not sure I like how it’s works.
If you are making the arms just make a 2 bases larger then the blazout base to put on the top and bottom, this will distribute the load better to the dash.
I’m not making the arm and I would reinforce the base
Nerka sells something like you are looking for. You can add an arm or 2 to their double mount. The one picture has an arm added.
This is what I ended up going with. Found a guy on FB that makes these.
the guys name is Jeromy Abraham.
I found him on the Ranger 1880/2880 FB page.
links on FB don’t work well
You must be logged in to reply to this topic.