Pool 5 Report

  • erick
    Grand Meadow, MN
    Posts: 3213
    #1328361

    Decided to ignore the crowds sunday on pool 4 and headed to pool 5. Didnt know much about the area but was just over there with the neighbor to get some eaters for fish fry. Decided to work the Dam area and started out jigging plastics with little success. We the talked to a fellow angler who said they were holding tight to the bottom so i changed to a different set up a 1 oz bell sinker and a plain hook on one rod with a floater ont he other. The fish were biting consistant but not on fire. LOTS of smaller walleye and sauger with a few nice fish being boated. Kept six 15 inch sauger and walleye. Lots of boats at the damn early but then spreading out downriver. I was going to give trolling 3 ways and cranks a try but didnt find time. So ovreal we caught quite a few fish nothing big at all though. Didnt see anyone boating fish near the dam on plastics but im guessing people work the wing dams and sand flats down river prolly were hitting the bigger eyes. Just baught Dave ‘hoggie’ Hogards Alumacraft on friday the thing is a fish maganet hahaha but ya love the thing if u see me out and about on Pool 4 or 5 stop by and give me a hollar will be up there this friday if I get my turkey by then

    lundgeye
    Rochester, Minnesota
    Posts: 1209
    #264079

    So let’s see a post of the new boat……we should know what we’re in for when we see you on the water..

    erick
    Grand Meadow, MN
    Posts: 3213
    #264090

    hey i keep tryin to make the pic smaller cause it says its to big but how do i do that?

    rivereyes
    Osceola, Wisconsin
    Posts: 2782
    #264099

    what I usually do is save it as a 640 x 480 jpeg file in normal or basic format… there should be a “resize” or “photo size” option in your photo editing package… when you have resized it check properties on the photo and see if the size is under 1000k then it will work….

    erick
    Grand Meadow, MN
    Posts: 3213
    #264130

    hey here is the boat

    erick
    Grand Meadow, MN
    Posts: 3213
    #264131

    sorry we will give it another try

    erick
    Grand Meadow, MN
    Posts: 3213
    #264132

    Here is one of the eaters that we caught early…because like i said we caught plenty of fish but nothin real big up near the dam

    jon_jordan
    St. Paul, Mn
    Posts: 10908
    #264133

    Congrats on the new boat…looks like a keeper!

    J.

    Dave Koonce
    Moderator
    Prairie du Chien Wi.
    Posts: 6946
    #264158

    Hey !!!1

    I fished out of that rig before !!

    Sweet Deal !!

    DeeZee
    Champlin, Mn
    Posts: 2128
    #264176

    Nice boat Erick!
    Looks like it come with the ability to catch fish too!
    Thanks for posting and we all look forward to your next outing so you can show us more fish pics!

    hawger
    Owatonna, MN
    Posts: 608
    #264188

    Nice boat there huh, Eric?

    Does it scoot right along with you in it alone, or not! Fun little rig to fish the river and small lakes. It was very good on gas and starts ever time… first time.

    Good luck with the boat. Call if you have any questions on any thing.

    You got room for one more sticker on there? I bet….

    I’ll send you a “Catch-N” Tackle Co. one if so.

    Dave Hogard

    erick
    Grand Meadow, MN
    Posts: 3213
    #264190

    Darn right she is a beauty. Ya she flys with me alone in there lol….yep there is plenty of room for more stickers on her send them on over…Ya i did quite a bity of riding sunday and it looks like the gas tank didnt even move a bit to me. Its almost friday and i can’t wait but starting tomorrow i have to go chase those darn turkeys so hopfully i am done tomorrow morning so i can fish..lol

    hawger
    Owatonna, MN
    Posts: 608
    #264295

    Ok Eric…

    Catch-N Tackle Co.

    Dave Hoggard

    Steve Plantz
    SE MN
    Posts: 12240
    #264301

    Hey Erick,
    nice looking rig, did Dave throw in some ring worms and super dos with the deal
    Missed you at the fist Walleye Searchers tournament, hopefully you can make the next one. Good luck on bagging that BIG TOM! I did not draw a licence this year, post a pic here if you get one!

    Steve Plantz
    SE MN
    Posts: 12240
    #264480

    Hey Erick,
    You are not the only one who got a new toy, hopefully mine will be ready to pick up sometime this week

    bill_cadwell
    Rochester, Minnesota
    Posts: 12607
    #264482

    Congrats on the new boat. Looks like a fishin machine. Keep posting those reports. Thanks, Bill

    lundgeye
    Rochester, Minnesota
    Posts: 1209
    #264487

    Steve, what motor are you putting on the new boat?

    Doug Ertl
    St Cloud, MN
    Posts: 957
    #264515

    Sweet! congrats Steve.

    richardsmith
    Owatonna Mn 55060
    Posts: 174
    #264522

    HUMMMMMMMMMM ! That boat looks pretty familiar ! It’s a fish magnet alright, Every time we went out, they would just jump in the boat !! Nice rigg !!

    Richard (Smitty)

    Keep a tight line !!!

    Steve Plantz
    SE MN
    Posts: 12240
    #264533

    Frank,
    for now I will have to get by with my 40 Evinrude off my old Rebel, I will trade up in a year or two to a 90 something. Have not decided what motor to go with yet. If nothing else I should be able to troll good with it

    dodge_boy
    Minocqua, Wi
    Posts: 554
    #264550

    All this talk of new boats is getting me excited about my new one. I just need to get rid of my current boat. Gettng a 16′ mirrocraft jon with a 50 on the back.

    lundgeye
    Rochester, Minnesota
    Posts: 1209
    #264554

    That’ll be a sweet rig…and yes, it should troll great! Your model has tons of room inside and I’m sure you’ll love the ride. Great color too…my Fisherman is green just like yours.

    Steve Plantz
    SE MN
    Posts: 12240
    #264563

    I do not know if you can tell from the pic or not, it is a 1997 1650 Angler, yes lots of room and plenty of storage. I have been looking for one for a long time, they stopped making this model in 1999 so it was like finding a needle in a hay stack. A guy from Iowa bought it new from Smitty’s, he had it two days when someone stoled it. They striped everything they could off the boat, motor, seats, even cut the gauges out of the dash and the throttle. The boat has never been in the water so the outside is like new, the inside needs some cleaning but it should clean up fine.

    lundgeye
    Rochester, Minnesota
    Posts: 1209
    #264569

    One of my fishing buddies has a 1650 Angler Deluxe, VERY nice boat to fish out of. You did good to find it over at Smittys. That’s where I found my little 1440V Rebel last December, 2 years old, never been in the water and probably sat in the yard the whole time since it was made. My fishing partner had a 60 Evinrude on his 1650 until the motor siezed up with that middle cylinder problem. He junked it out and bought a new EFI Merc 60 this year, very nice motor so far. He gets about 30-32 mph with it with the 60 or so he says. It feels about right to me although we have not tested it with a GPS. Your 40 should make it a very useable boat until you decide to upgrade. A 90 would make it FLY!

Viewing 24 posts - 1 through 24 (of 24 total)

You must be logged in to reply to this topic.