Vexilar Transducer question

  • Ryan Pahl
    Posts: 39
    December 6, 2015 at 12:51 pm #1582455

    I know that this picture is pretty blurry and maybe be hard to see, but the wire is starting to separate from the transducer. What’s a easy/cost effective fix for this as buying a new ducer is out of the option at this point due to money?

    Attachments:

    1. 11046874_10206035127249484_5165922277340625915_n.jpg

    AaronMoore
    Posts: 229
    December 6, 2015 at 1:58 pm #1582469

    I had that issue a few years ago and used superglue, not problem since

    oldbear
    State Center, Iowa
    Posts: 326
    December 6, 2015 at 2:47 pm #1582482

    How about Shoe Goo.

    Ashford
    Rochester area
    Posts: 21
    December 6, 2015 at 7:40 pm #1582546

    I used shoe goop on one of my older ice ducees with great success. Make sure its hanging straight down when glueing and drying though or will shoot to the side.

    Ryan Pahl
    Posts: 39
    December 13, 2015 at 3:45 pm #1584295

    I was also told to use “Liquid Tape”, has anyone heard if this is as effective?

    puddlepounder
    Cove Bay Mille Lacs lake MN
    Posts: 1814
    December 13, 2015 at 3:54 pm #1584296

    Goop sportsman or marine glue

    taz
    Frederic wi
    Posts: 395
    December 13, 2015 at 4:05 pm #1584297

    Liquid tape works also

    Justin Radel
    Posts: 83
    December 13, 2015 at 7:52 pm #1584355

    I have used gorilla glue to fix the exact same thing. Make sure it is hanging straight down during the cure time but that stuff dries hard like a resin and keeps the water out. Just be careful because it does expand as it cures. So a little goes a long way.

Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.