Unit for mapping

  • Mike Burke
    Oskaloosa, Iowa
    Posts: 267
    May 21, 2022 at 11:27 pm #2126035

    Thinking about upgrading a unit just for mapping. I have a LMS 332 c that is 5” and thinking about getting a used 7” or 9” unit for mapping. What series would be good for this ?
    Any suggestions for a good used model for this application?
    Thanks

    Eelpoutguy
    Farmington, Outing
    Posts: 10366
    May 22, 2022 at 10:09 am #2126063

    I’ve been running a helix seven for the last six or seven years. It works good for what I need it to do

    Attachments:

    1. DA2BA7E0-3389-46F7-9B42-8816ACCD39AD-scaled.jpeg

    2. BB337B58-2490-4F4E-9C72-122C58818EB7-scaled.jpeg

    bullcans
    Northfield MN
    Posts: 2002
    May 22, 2022 at 12:45 pm #2126079

    Is this in addition to the HDS 9 gen 3 you recently got? If so, I would recommend staying with a Lowrance HDS unit since you already have one. That way you can connect them via ethernet.
    Or NMEA.

    Mike Burke
    Oskaloosa, Iowa
    Posts: 267
    May 22, 2022 at 9:03 pm #2126140

    Yes, this will be an addition to the HDS I purchased. I’ll look for a nice HDS7. I should probably look at Gen2 or 3 right ?
    Thanks

    bullcans
    Northfield MN
    Posts: 2002
    May 23, 2022 at 11:07 am #2126232

    Yes
    I would lean towards a Gen 3. Better and more current mapping options.

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.