Treating Camo fabric

  • Randy Wieland
    Lebanon. WI
    Posts: 13475
    #2114518

    I have a couple of the original minute man blinds. Ya, I know – very old. Anyways, still very functional and has like them for various spots in my farm. However the cloth is fading and they have such a bright shiny appearance now. Anyone have experience in dye or a treatment to darken and dull up. I usually brush them in well, but as you can see in the pic they are getting washed out

    Attachments:
    1. 4025A810-7D35-42EC-9014-B677C5BAA047.jpeg

    tornadochaser
    Posts: 756
    #2114520

    Spray paint them with matte paints. We paint layout blinds for waterfowl hunting all of the time.
    Or mix up dirt and water into a mud slurry and mud the blind. let it dry, then lightly brush off excess with a hand broom.

    haleysgold
    SE MN
    Posts: 1463
    #2114526

    Boil walnuts and then spray the liquid on it.
    Kinda like what I used to do to traps to season them.
    Maybe you still do that? You still trapping?

    Randy Wieland
    Lebanon. WI
    Posts: 13475
    #2114527

    Boil walnuts and then spray the liquid on it.
    Kinda like what I used to do to traps to season them.
    Maybe you still do that? You still trapping?

    Only damage control work. Worth doing a small sample piece

    bullcans
    Northfield MN
    Posts: 2004
    #2114530

    “Or mix up dirt and water into a mud slurry and mud the blind. let it dry, then lightly brush off excess with a hand broom”.
    X2

    We do this with our ground blinds as well. waytogo

    Randy Wieland
    Lebanon. WI
    Posts: 13475
    #2114569

    Btw – fabric is more like canvas, not nylon or synthetic. Concerned that the rubbed in mud will break down fibers. I did that with some sheet canvas years ago and it didn’t hold up to the weather long

    BigWerm
    SW Metro
    Posts: 11624
    #2114570

    Use coffee and tea to stain it? Can get a pretty wide range of browns from a strong coffee to a light tea.

    TheFamousGrouse
    St. Paul, MN
    Posts: 11626
    #2114577

    I’d be tempted to try good old Rit fabric dye in a spray bottle or even a pump sprayer. Easy to mix, fast to apply, and best of all pretty cheap. Remember to use dye fixer as the last step to lock in the dye, I’d say this is worth doing especially to get fade resistance.

    You can get all kinds of colors, black, brown, tan, green, etc. Pretty cheap as well, about $8 per color and that’ll make plenty of dye.

    I’d personally try Rit first because it’s the cheaper option. I’d say spray paint is the only other option, but it’s going to take a lot of rattle cans to paint each blind.

    Snake ii’s
    Posts: 515
    #2114584

    Get a case of Red Man chewing tobacco. Chew, spit, repeat.

    JEREMY
    BP
    Posts: 3894
    #2114596

    Looks like all my dads camo pants that he wont retire.

    Randy Wieland
    Lebanon. WI
    Posts: 13475
    #2114609

    Looks like all my dads camo pants that he wont retire.

    Be nice to us old farts. We don’t believe in the disposable world. Plus, this blind isn’t that old, probably bought it in 1992 or 93 rotflol whoa, maybe I have gotten some use out of these blinds shock shock shock shock

    riverdewey
    St. Paul, MN
    Posts: 53
    #2114652

    I’d be tempted to try good old Rit fabric dye in a spray bottle or even a pump sprayer. Easy to mix, fast to apply, and best of all pretty cheap. Remember to use dye fixer as the last step to lock in the dye, I’d say this is worth doing especially to get fade resistance.

    X2

Viewing 12 posts - 1 through 12 (of 12 total)

You must be logged in to reply to this topic.