transducer problem

I also posted this in the lowrance group. I have a hds 9 gen 3 on my yar craft 2095BTX. The 2d transducer was put between the main motor and my vantage. Whenever I run my vantage I get a very broke up bottom line and it doesn’t read fish very well. When I don’t use my vantage it works perfect with a good bottom line and shows fish well. Do I need to move it to the other side of the boat? I was thinking that because the vantage is lower when deployed down it is causing interference. Or do I just need to adjust some setting? Just so you know what I have going on with the back of my boat I have a LSS structure scan on one of the boat and 2n on the other side. Here are some pictures of what I have going on with the vantage up and down. The white cord is just the cover strap.

Attachments:

1. 

   transducer-1.jpg
   

2. 

   transducer1-1.jpg
   

might be from the vantage when in use could have some interference I would try either moving the transducer or hooking it up to the vantage should fix it