Trailer Light Re-wiring and Replacement

  • tmyboy2001
    Lakeville, MN
    Posts: 284
    March 11, 2019 at 12:58 pm #1842295

    Can anyone recommend a shop in or near the metro that can completely strip the current trailer lights and wiring in my Shorelander and replace with all new and LED’s?

    Oranda
    Posts: 16
    March 11, 2019 at 1:10 pm #1842302

    I have used Great American Marine for years an been very happy with their work and pricing.

    They are in Bloomington.

    FishBlood&RiverMud
    Prescott
    Posts: 6687
    March 11, 2019 at 2:14 pm #1842318

    Easy job but if you hire it out make sure you specify it done correctly!

    Solder all connections.
    Cover solder joint with dielectric grease. Cover joint with heat shrink tubing, heating center outward.
    Have them run a ground wire to the truck wiring harness rather than ground to frame.

    If your not careful, you’ll get cheap connections and have problems in a year.

    bigstorm
    Southern WI
    Posts: 1468
    March 12, 2019 at 7:10 am #1842464

    Also, if you trailer the boat a decent amount, have the new harness put inside split tubing, over time the insulation will wear down on the wires as the rub against he inside of the frame

    bigcrappie
    Blaine
    Posts: 4376
    March 12, 2019 at 9:40 am #1842524

    Tmyboy2001, I can help you out and do the job as Fishblood states. Been doing 12v DC work for a long time no short cuts here. PM me and we can talk.

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.