Bl22 front sight

  • snowolf68
    Posts: 8
    November 26, 2012 at 12:22 am #210299

    Hey everyone, I recently was cleaning my browning bl22 and like a dumb@$$ dropped it and the front sight smashed against a table leg and got bent out of shape. I have no idea how to remove the sight and reattach a new one but this seems like something you guys could help me with. so any help regaurding the replacement of my sight would be apreciated.

    Randy Wieland
    Lebanon. WI
    Posts: 13467
    November 26, 2012 at 1:22 am #127343

    The sight is pressed into a dovetail groove on the barrel. It needs to be tapped into place – illustrated in the owners manual on page 12 of 14
    BL22 owners manual

    snowolf68
    Posts: 8
    November 26, 2012 at 1:31 am #127344

    Thanks but the front sight, like the one right at the muzzle is actually bent out of shape. any ideas for replacing this?

    snowolf68
    Posts: 8
    November 26, 2012 at 1:51 am #127348

    Alright sweet, not trying to sound dumb but how do I actually remove and install the new sight? Thanks.

    Randy Wieland
    Lebanon. WI
    Posts: 13467
    November 26, 2012 at 2:01 am #127349

    Only if your comfortable doing it. Hammer, punch, and wooden dowel. Tap the old off with a hammer and punch, lightly oil, and hammer (with the wooden dowel) the new one in. They fit tight!

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.