New Gun Store in Woodbury

Jeff go to reeldr.com they have everything you need even advice to help i do my own if you do the cheap ones you can do the others good luck

John’s Tackle Service ..John Walter, Byron, MN 507-775-6406 John will help you.

I believe there is a few IDO’ers that have used him b4 with great results

I’ll second John Walter. He’s repaired and cleaned many for me the past 20+ years. If the bail spring isn’t broken but the bail still doesn’t snap back John will likely check to see if the bail is “sprung”. He’s fixed a couple for me with that problem and advised me the cause is usually not transporting them carefully enough.

Thanks guys…..
Mr.Walter will probably be getting a repair package in the mail

Well Jeff, I learned the real cheap method …..I always closed my bail by hand
No broken springs
Old Habits die hard

Quote:

---

Well Jeff, I learned the real cheap method …..I always closed my bail by hand
No broken springs
Old Habits die hard

---

Thanks Mudshark but that sounds like way to much work.

If it is a Shimano they all take the same spring ..at least my different models do. It takes about 5 minutes even if you have never done one before.

Pull the two screw out from the bail pickup side and the spring lies under neither the small plate. Nothing to it don`t even need to remove the other side of the bail.

I forgot to post a couple weeks back. There’s a new gun store in Woodbury on the corner of 494 and Valley Creek. He was formerly in Lake Elmo. Very big on reloading supplies. Some guns and he does gun transfers very cheap.

whats the name of the place?

Dont know.