I have a Remington 700 VLS and i don’t know if I can have the trigger pull adjusted or if I need a new trigger? Can someone help me out with this one?
February 5, 2009 at 2:58 am
#209974
Adjustable Trigger Pull
-
February 5, 2009 at 3:22 am #47345
Yes you should be able to. I have the Remington 700 ADL in .223 All you have to do is take the stock off and on the front of the trigger there are two screws. Not for sure what one i turned i believe it was the top and that made my trigger pull way lighter. I like it that light so you dont jerk the trigger or flinch so to speak.
February 14, 2009 at 5:43 am #47648
Quote:
All you have to do is take the stock off and on the front of the trigger there are two screws. Not for sure what one i turned i believe it was the top and that made my trigger pull way lighter.
DO NOT ATTEMPT THIS ON YOU OWN!!!
This is nothing to mess with if you do not know what you are doing if it was me I would take it to a gun smith.February 14, 2009 at 9:46 am #47649Steve has a point.
I have a Winchester Model 70 in 243. I was told how to adjust the pull and I did…my foot dropped into a hole while I was walking and that jolt set the firing pin off. Now the rifle was unloaded at the time…hearing the pin drop…kinda shook me up. I recocked the bolt and hit the stock of the gun with my hand. Click!
I’ve found that the pull doesn’t have to be set that light!
February 14, 2009 at 9:25 pm #47655Thanks for the input guys. I’m going to go get it worked on Im just don’t want anything to happen cuz I wouldn’t want to mess anything up
February 18, 2009 at 3:43 am #477453 pound MINIMUM!!!
3.5 is what most varmint and target heads shoot. Unless you have the proper scale, I wouldn’t mess with it.
Viewing 6 posts - 1 through 6 (of 6 total)
You must be logged in to reply to this topic.