Gunsmithing Torque Wrench

  • shoot_n_release
    Mora, MN
    Posts: 756
    November 27, 2006 at 3:29 pm #209819

    Hey guys,

    I’m looking for a christmas gift for my Dad and need some help from a seasoned gunsmith.

    My dad has a library of guns he has been collecting over the years, and does as much of his own gunsmithing as he is capable of. He gave my sister an idea for a christmas gift this year and the other siblings and I would like to go in on something that might be of even more use to him.

    Here is the torque screwdriver he suggested: F.A.T. Wrench (Advertised for $32 – Guns and Ammo magazine)

    Are there gunsmithing tool kits such as the Deluxe Screwdriver Set, which also come with a torque wrench?

    Thanks for your help.

    Lars

    yellowdog
    Alma Wi
    Posts: 1303
    November 27, 2006 at 4:38 pm #25942

    Try googling Brownells. They are a good source of gunsmithing tools.

    yellowdog
    Alma Wi
    Posts: 1303
    November 27, 2006 at 4:38 pm #503703

    Try googling Brownells. They are a good source of gunsmithing tools.

    High_Cap
    St. Paul MN
    Posts: 131
    November 27, 2006 at 10:27 pm #25996

    +1 on the Brownells, their tools are top shelf and the prices aren’t to bad. Get him the big screwdriver set, it is really nice that is the one we use for the shop.

    High_Cap
    St. Paul MN
    Posts: 131
    November 27, 2006 at 10:27 pm #503866

    +1 on the Brownells, their tools are top shelf and the prices aren’t to bad. Get him the big screwdriver set, it is really nice that is the one we use for the shop.

    walleye1274
    Chippewa Falls, WI
    Posts: 515
    November 30, 2006 at 2:40 pm #26256

    Midway USA has a nice torque wrench. They have a lot of other handy tools as well. Good luck

    walleye1274
    Chippewa Falls, WI
    Posts: 515
    November 30, 2006 at 2:40 pm #505178

    Midway USA has a nice torque wrench. They have a lot of other handy tools as well. Good luck

    Dobber
    S.W. WI
    Posts: 113
    December 1, 2006 at 2:06 am #26328

    I use a inch pound torque wrench from harbor freight. its the same one I have used for years on transmissions. I think it was about 30$.

    Dobber
    S.W. WI
    Posts: 113
    December 1, 2006 at 2:06 am #505523

    I use a inch pound torque wrench from harbor freight. its the same one I have used for years on transmissions. I think it was about 30$.

Viewing 11 posts - 1 through 11 (of 11 total)

You must be logged in to reply to this topic.