Terrova issue?

  • 5 EYES
    Posts: 10
    #1711301

    Three times in the last week I have gotten line wrapped inside the prop connection. Each time I was immediately able to remove the prop and clean out the line. The third time it was quite a bit of Suffix 832, maybe 100 feet. I used it for about 6 hours after that and no water has entered the head. I am guessing the seal is fine. If anyone had any experience with this let me know if I should be good to go. Thanks.

    igotone
    Posts: 1746
    #1711311

    I have only had one person get line in my electric motor !!!
    She don’t fish with me anymore…. lol

    You should be OK — you can always take it apart and check if water is in the motor case — I believe there is just three long bolts to take it off and check. I would get a new seal and replace it if the motor has same age to it. Might as well since you are right there .

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.