New way to protect wacky worms?

  • FryDog62
    Posts: 3696
    #1360831

    Have seen previous posts here about how soft wacky worms work great but tend to not last very long after a catch or two. Some have mentioned using a ring around the worm with the hook through the ring. Others have said that kind of works but is a hassle or just doesn’t work as well.

    I recently saw a product where the ring is embedded inside of the worm for strength and natural floating action. Anyone tried these?

    http://www.bigbitebaits.com/Wackystick.htm

    ted-merdan
    Posts: 1036
    #1380378

    I use the same one Joe is using. Has worked really well for me and I get extra o rings at the hardware store when I need them.

    bronzbak
    Long way from home
    Posts: 316
    #1380393

    I’ve been hand pouring my own for a few years. That’s a good idea to put the ring inside. Now I’ve got another new thing to try!

    tom_gursky
    Michigan's Upper Peninsula(Iron Mountain)
    Posts: 4751
    #1387081

    Cabelas came out with the same O ring worm last year…but they are never quite as effective as Yamamotos…Danggit!!!

    I try every Senko style I see but it seems those Bass are on the Yamamoto payroll

    They ain’t the cheapest but they sure catch more bass for me!

    zeke6710
    NULL
    Posts: 24
    #1389865

    I agree with most all the other posters. The o rings are simple to put on with the proper tool.

    hosejr
    Posts: 68
    #1403735

    I gutted a sharpie. Went to local hardware store and bought a bunch of little o-rings. I put all the o-rings on the sharpie. Put the worm in the sharpie and slide the o-ring on the worm. Works very well. Many more fish on one worm.

    BBKK
    IA
    Posts: 4033
    #1378569

    Quote:


    I gutted a sharpie. Went to local hardware store and bought a bunch of little o-rings. I put all the o-rings on the sharpie. Put the worm in the sharpie and slide the o-ring on the worm. Works very well. Many more fish on one worm.


    Right on! I had that set-up for a few months last year until I misplaced it. I ended up buying the cheap plastic wacky tool off ebay for something like $4 with 50 rings. Sharpie will be my next tool again when I lose this one.

    One of my favorite techniques in the summer is to wacky rig a small dropshot worm on a #8 octopus hook, I was losing way too many worms and then I had an idea. Skirt making tool and clear skirt bands. Works like a charm!

    Tom Sawvell
    Inactive
    Posts: 9559
    #1403743

    Get a cheap knitting needle wide enough to slip a worm into. Cut the needle off and clean up the flashing from cutting and then thread your rubber rings on the pointed end. Load it up and you’re good to go for the day.

    senko77
    Member
    Posts: 3
    #1403799

    The rings work great and all but I can never get the same action as as when I just use a hook. Losing a bait is worth catching a big fish.

    FryDog62
    Posts: 3696
    #1403846

    Quote:


    The rings work great and all but I can never get the same action as as when I just use a hook. Losing a bait is worth catching a big fish.


    I agree, I have never quite had the same action/luck with the rings. That’s why I might at least try the embedded product in the original post and at least experiment a bit.

    I wish Yamamoto would come out with the embedded O ring, still think they have the softest, tastiest senkos. But then again, why should they? They’ll sell more without them.

    BBKK
    IA
    Posts: 4033
    #1403851

    Put the hook through the worm and under the o-ring. in a 45ยบ angle. You won’t get as many fish per bait as you would with just hooking it under the o-ring, but you will get more than with no ring.. and the action is the same.

Viewing 13 posts - 1 through 13 (of 13 total)

You must be logged in to reply to this topic.