Lowrance LCF-1440?

  • sandacz
    Posts: 56
    February 6, 2011 at 5:15 pm #1320085

    I just got 2008 wx1880 that came with the Lowrance LCF-1440 flasher in the dashboard and it has glassed-in transducer. I added 2 Humminbird units, one on the dash and one on the bow. I have a couple questions that I hoped someone who has the LCF-1440 could answer: 1. what do you use it for? And 2. would it interfere with the Humminbird returns? Thanks.

    dandorn
    M.I.N.N.E.S.O.T.A.
    Posts: 3207
    February 6, 2011 at 5:25 pm #934185

    Thank you for buying a Lowrance LCF-1440 In-Dash Flasher! Your
    unit is a high-quality flasher sonar designed for both professional and
    novice fishermen. All Lowrance sonars have an automatic mode that
    finds and displays the bottom, fish, underwater structure and more –
    right out of the box. All you have to do is press the on (PWR) key.
    However, if you want to fine-tune your unit, press the MENU UP key. The
    sonar has several powerful features you can control by scrolling through
    easy-to-use menus with the arrow and menu keys.
    To get started with your Lowrance sonar, first read the installation
    section. It contains instructions for mounting the sonar unit. If
    necessary, also consult the accompanying transducer installation
    instructions.
    Following recommended installation practices will pay off in optimum
    performance of your Lowrance sonar. Improper installation can cause
    problems down the road, especially if the transducer is badly mounted.
    After you’ve read the installation instructions, install the unit and
    accessories. Then, read the rest of the manual. The more you know
    about your sonar, the better it will work for you.
    Take advantage of the Simulator feature. It allows you to practice
    operating your sonar before you get it in the water. And when you finally
    head for your favorite fishing hole, take this manual along for reference.
    Capabilities and Specifications: LCF-1440
    General
    Case size: …………………. 3.8″ diameter x 3.5″ depth (9.7 cm diameter x
    9.1 cm depth). Sealed, waterproof; suitable for
    saltwater use.
    Display:…………………….Sunlight-viewable Film SuperTwist LCD. 2.5″
    (6.3 cm) diameter viewing area.
    Resolution:……………….132 x 132 pixels (at x/y axis centerlines).
    Backlighting:……………Multi-level white LED backlit screen.
    Input power:…………….10 to 17 volts DC.
    Current drain: …………140 mA lights off; 200 mA lights on full.
    Back-up memory: …….Built-in memory stores sonar settings when
    unit is turned off.
    Sonar
    Frequency:……………….200 kHz.
    Transducers: ……………..Choice of 20°, 200 kHz transducers with gray
    connectors.

    Manual

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.