Anchor MX1825

  • Hatch99
    Posts: 85
    May 8, 2014 at 9:54 am #1360815

    Does anyone have any suggestions on the best anchor for a MX1825 on lakes like Leech & Winnie? Thanks in advance!

    Jack Naylor
    Apple Valley, MN
    Posts: 5668
    May 8, 2014 at 10:03 am #1409282

    I really like the WaterSpike for an anchor.
    They are different sizes, but the middle size should
    work just fine for you.
    Jack

    John Peterson
    Woodbury, Minnesota
    Posts: 349
    May 8, 2014 at 10:28 am #1409293

    The Waterspike is a great anchor…be sure to follow the instructions and have the proper length of anchor rope.

    FishBlood&RiverMud
    Prescott
    Posts: 6687
    May 8, 2014 at 10:53 am #1409305

    Waterspike, 15′ of rope, 10# anchor, 30-100′ of line to boat.

    This setup is more effective than running a chain from your waterspike.

    A bungee between your anchor line and your boat will also help to absorb the shock of waves hitting your boat and busting your anchor loose.

    When conditions aren’t windy, just drop the waterspike without the 10# anchor 15′ behind it.

    Eric Rehberg
    Eau Claire, WI
    Posts: 3071
    May 8, 2014 at 10:56 am #1409309

    best 2 options I have found is the richter anchor in the 18lb size and the water spike. Comes down to personal preference from there.

    blackbay
    Posts: 699
    May 8, 2014 at 11:16 am #1409318

    I’ve used a Waterspike in the past and now use a Richter on my boat. Both work well. I prefer the Richter because it seems to hold better for me in the places I fish. Just make sure you get the correct size, use a few feet of chain, and have enough rope for the water you usually anchor in.

    Hatch99
    Posts: 85
    May 8, 2014 at 12:33 pm #1409338

    Thanks everyone! GOOD LUCK THIS WEEKEND!

    mar-80
    Chippewa Falls, WI
    Posts: 250
    May 8, 2014 at 2:09 pm #1409357

    The richter anchor holds mine. 18lb

Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.