Wx1850 ladder

  • waterice
    Elk Point, SD
    Posts: 126
    #1360781

    I want to put a different ladder on the boat 2013 wx1850 so it easier for kids and adults to get in. Anyone put a different ladder than what is on the boat from factory? Dealer is going to contact skeeter tomorrow and see what they have hopefully they will have a photo with it on the boat.

    riverrookie
    Kasson, MN
    Posts: 228
    #1394203

    If you come up with something, please post.

    waterice
    Elk Point, SD
    Posts: 126
    #1394214

    I think I found the answer. I found a 2014 skeeter that had a different ladder in it and really like it hopefully it came from skeeter. I can’t figure how to post a photo using the I pad.

    Looked at 3 different boats from the same place and they all had the same ladder so I am sure it came skeeter.

    Eric Rehberg
    Eau Claire, WI
    Posts: 3071
    #1394218

    Skeeter offers a boarding ladder that fits on most all the walleye boats. I don’t have a picture of it on my lap top but can post one in the morning once in the shop!

    waterice
    Elk Point, SD
    Posts: 126
    #1394224

    Thanks I hope it’s the one on the 2014.

    Also what is the transom washer?

    Eric Rehberg
    Eau Claire, WI
    Posts: 3071
    #1394230

    Im not exactly sure what transom washer means but if I had to guess I would say it would be something similar to a wash down system.

    692fisherman
    champlin mn
    Posts: 370
    #1394299

    GARELICK Sport-Dive Ladder West Marine

    this is what im putting on my ranger…
    hope the link works

    692fisherman
    champlin mn
    Posts: 370
    #1394305

    link didnt work….sorry im a fisherman not a it guy!

    Eric Rehberg
    Eau Claire, WI
    Posts: 3071
    #1394320

    Here are a couple pictures of the factory skeeter one installed!

    waterice
    Elk Point, SD
    Posts: 126
    #1394323

    Thank you so much that is the same ladder i was looking at last nigt. A lot nicer than the transom mounted one.

    JoeMX1825
    MN
    Posts: 17848
    #1394349

    Quote:


    Im not exactly sure what transom washer means but if I had to guess I would say it would be something similar to a wash down system.


    I’m curious too as I don’t remember ever seeing any type of hose on the back of the MX1825? It’s listed as a standard option under “Construction & Safety Features and Options” section on Skeeter’s website (http://www.skeeterboats.com/products/11/35)

    Nevermind – The “Skeeter Transom Washer” is literally the big “Skeeter” aluminum plate washer under the rear motor mount…I guess they could have worded it a little better, i agree it’s misleading..

    John Schultz
    Inactive
    Portage, WI
    Posts: 3309
    #1394382

    Quote:


    Quote:


    Im not exactly sure what transom washer means but if I had to guess I would say it would be something similar to a wash down system.


    I’m curious too as I don’t remember ever seeing any type of hose on the back of the MX1825? It’s listed as a standard option under “Construction & Safety Features and Options” section on Skeeter’s website (http://www.skeeterboats.com/products/11/35)

    Nevermind – The “Skeeter Transom Washer” is literally the big “Skeeter” aluminum plate washer under the rear motor mount…I guess they could have worded it a little better, i agree it’s misleading..


    Its a washer, its on a transom, and the transom is on a skeeter. Seems pretty accurate.

    JoeMX1825
    MN
    Posts: 17848
    #1394394

    Its a washer, its on a transom, and the transom is on a skeeter. Seems pretty accurate.


    I’d say it’s not when probably the best Skeeter rigging guy on the planet misinterpreted it as well…

    It’s also the 2nd search result on Google with a conversation about it on the Walleyecentral message baord, the first few responses on the thread talk about it possibly being a separate pump used for washing down the boat…so confusing…

    The FX & IClass weigh-in bag hose back at the transom probably fueled some fire to the confusion as well, that’s the first thing I thought of when I saw it on the options sheet.

    I could go on, but bottom line, mystery solved

    waterice
    Elk Point, SD
    Posts: 126
    #1394436

    Thank you for all the input. I went and sat in the boat yesterday to figue out where to place the depth finder in the bow decided on the floor and to have the rails installed further up towards the trolling motor for rod holders and to see how the HB would fit on the council. Spent about 45 minutes going throught the boat double checking everything and asking a ton of questions.

    I cant wait for the ice to go away.

    Rob Bullock
    Posts: 2
    #1606701

    Just wondering if screws are sufficient, or do i need to through bolt on my wx1900

    Eric Rehberg
    Eau Claire, WI
    Posts: 3071
    #1606823

    Just wondering if screws are sufficient, or do i need to through bolt on my wx1900

    We have installed them with #10 screws and silicone and haven’t had any issues.

Viewing 16 posts - 1 through 16 (of 16 total)

You must be logged in to reply to this topic.