What is max speed on a 2100 with a 300 yamaha?
March 23, 2012 at 11:43 am
#1320299
2100 and 300hp yammi
-
March 23, 2012 at 12:00 pm #1051713
stock 58
with the rite prop low to mid 60’s
March 23, 2012 at 12:14 pm #1051718I’ve opted to utilize a 4 blade prop which has cut a bit off the top end, but provided a dominate hole shot/mid range power. I can get about 56 MPH with this. Prior to the 4 blade I was seeing 61 with the stock 3 blade.
March 23, 2012 at 12:23 pm #1051726we avg 58 on flat water but with the rite chop 59-60.
the hole shot never changes with 1 or 4 people in the boat. the power is unreal with this motor. and we also never had a single service issue all year this motor it runs AWESOME
March 23, 2012 at 12:31 pm #1051730Quote:
we avg 58 on flat water but with the rite chop 59-60.
the hole shot never changes with 1 or 4 people in the boat. the power is unreal with this motor. and we also never had a single service issue all year this motor it runs AWESOME
SPOT ON!! 227 hours on the Big 300 last year and not ONE hic-up!! LOVE YAMAHA!!
March 23, 2012 at 12:36 pm #1051732After trying a few props our results are the same as Mrwalleye.
I decided to experiment with a jack plate and in the right conditions I got 62.8 out of it. I still have 3 more props to try out this year. On the average I will run 60-60.5 fully loaded.
This hull was not set up for the best top end as when you are WOT and trimmed out there still is a lot of boat in the water compared to the old ZX2050. But the rough water ride is night and day
March 23, 2012 at 12:38 pm #1051733Quote:
stock 58
with the rite prop low to mid 60’s
What prop would that be? I talked with a lot of people and most see that 58-59 and 60 when all conditions are perfect.
March 23, 2012 at 12:52 pm #1051741I’d have to look. but it was the one it came with.
Viewing 8 posts - 1 through 8 (of 8 total)
You must be logged in to reply to this topic.