MX 20foot?

  • ozarkeyes
    Arkansas
    Posts: 22
    #1320291

    What is latest word on the progress of a MX 20ftr?

    James Holst
    Keymaster
    SE Minnesota
    Posts: 18926
    #1044336

    Skeeter engineers are hard at work on this model and at the MPLS boat show we were told they’re making good progress. No hard and fast release date has been offered up at this time. Suffice it to say, I’m more than a little antsy to see this model become a reality so as soon as anything is put out as a definite regarding timing we’ll be sure to share that here.

    francisco4
    Holmen, WI
    Posts: 3607
    #1044337

    Crazy. I was thinking the same thing at some point today.

    FDR

    James Holst
    Keymaster
    SE Minnesota
    Posts: 18926
    #1044343

    Quote:


    Crazy. I was thinking the same thing at some point today.

    FDR


    No surprise. This weather is making people all twitchy thinking about getting back in the boats again.

    matt-p
    White Bear Lake, MN
    Posts: 643
    #1044433

    Quote:


    Quote:


    Crazy. I was thinking the same thing at some point today.

    FDR


    No surprise. This weather is making people all twitchy thinking about getting back in the boats again.


    Just a little bit

    Fife
    Ramsey, MN
    Posts: 4044
    #1044576

    MX 2025T/150 hp Yamaha

    Has a nice ring to it.

    Wade Boardman
    Grand Rapids, MN
    Posts: 4453
    #1044578

    Heck with that. I’m wanting/waiting to see the MX1825T.

    Michael C. Winther
    Reedsburg, WI
    Posts: 1498
    #1044601

    a “reliable source” told me they should have the MX20xx ready to go this summer. i imagine that would give it some impact time prior to the big sales push next winter?

    as far as tillers go, i feel that you get much better performance out of a boat designed to be a tiller from the hull up, rather than converting a wheel boat. so i’d rather not have a tiller interior on an MX console hull.
    add the extended keel design to the current WX2000T (which I assume they’re going to do anyway), make a couple tweaks to the interior such as longer rod lockers and some kind of rear deck, and get a Yamaha-ready power steering system for big motors and you’ve got the perfect MX tiller boat!
    Dave M??? how about it???

    James Holst
    Keymaster
    SE Minnesota
    Posts: 18926
    #1044752

    Quote:


    as far as tillers go, i feel that you get much better performance out of a boat designed to be a tiller from the hull up,


    The MX hulls were specifically designed to eventually serve as a tiller. Basically you have a wheel boat on a tiller hull and not the other way around.

    Michael C. Winther
    Reedsburg, WI
    Posts: 1498
    #1044856

    Quote:


    The MX hulls were specifically designed to eventually serve as a tiller. Basically you have a wheel boat on a tiller hull and not the other way around.


    well that’s just…outstanding!
    it also points to the MX1825’s reputation for planing quickly and staying on plane easily with the F150: plenty of stern lift. maybe a 20′ tiller model MX will show up in time for me to upgrade in a few years.

    and hopefully they’ll get power steering back along with it…you know, because us big tiller guys represent such a huge market segment.

    Fife
    Ramsey, MN
    Posts: 4044
    #1044858

    Quote:


    Quote:


    as far as tillers go, i feel that you get much better performance out of a boat designed to be a tiller from the hull up,


    The MX hulls were specifically designed to eventually serve as a tiller. Basically you have a wheel boat on a tiller hull and not the other way around.


    Exactly!

    Dear Skeeter,

    After you get that 20′ MX hull completed, please put a 2000T top cap on it, mount a 150 on the back, and ship it to Skeeter Boat Center. I will be there to pick it up.

    mark-o.
    Posts: 33
    #1045176

    If you could get Skeeter to re-rate the WX200T for a 150, I know a dealer that could put the new Merc 150 fourstroke on the back with the Merc Big Tiller steering. I’ve been inquiring to Steve about this, but Yamaha doesn’t seem to like the idea. I figure if enough guys call Skeeter, they might change the rating.

    On another note, I also heard the MX20?? should be out sometime around dealer meeting time. Time will tell I guess.

    ozarkeyes
    Arkansas
    Posts: 22
    #1045236

    My my- look what I started
    Have to wait till summer, bummer, maybe will have take a trip to Kilgore TX, and get a sneek peek! Its only a 4 1/2 hour trip.

    ozarkeyes
    Arkansas
    Posts: 22
    #1054484

    Did the new MX 20 make it to the sport show? Any word about when? Have not heard, so I guess Skeeter does not have it ready yet?

    James Holst
    Keymaster
    SE Minnesota
    Posts: 18926
    #1054492

    Quote:


    Did the new MX 20 make it to the sport show? Any word about when? Have not heard, so I guess Skeeter does not have it ready yet?


    No MX2025 at the show but do expect to see that new model as a 2013 which means we should see it some time this summer.

    ozarkeyes
    Arkansas
    Posts: 22
    #1073622

    Any up to date news from Skeeter on progress of the 20ftr?

    Eric Rehberg
    Eau Claire, WI
    Posts: 3071
    #1073713

    I have not heard any specifics but all things are leading up to possiably be towards the end of this summer. If any more details are released I will be sure to share!!

Viewing 17 posts - 1 through 17 (of 17 total)

You must be logged in to reply to this topic.