Skeeter WX2060 point 1 puck placement

iowaskeeterguy
Posts: 5

January 7, 2018 at 7:12 pm #1742040

First time poster; I ordered a new 2018 WX 2060 and it is supposed to be in soon and I was wondering where should the point 1 antennae be mounted? I’ve seen it both in the back and at the console. Looking at pics of the boat I’m not sure there is a good spot near the back.

The boat will be outfitted with 2 HDS Carbon 12’s with 3D structure scan one at the bow and console.

Thanks!

dandorn
M.I.N.N.E.S.O.T.A.
Posts: 3207

January 7, 2018 at 7:48 pm #1742064

Welcome to In-Depth!

http://support.lowrance.com/system/selfservice.controller?CONFIGURATION=1001&PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&CMD=VIEW_ARTICLE&ARTICLE_ID=3864

Chris Messerschmidt
Minnesota
Posts: 615

March 12, 2018 at 7:34 pm #1759006

I had mine put on the gunnel on the back. Closest to the transducer. Works fine. If you have room, on the dash is a good spot as well. I do a lot of logging for Navionics so I wanted it to be as accurate for maps as possible.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.