Rub Rail

I am looking for a replacement rub rail insert for my 2007 Lund Pro Angler. I have looked online and can find some similar but not quite like this one. Everything I have found is symmetrical, mine is different on the top vs the bottom. I wouldn’t think this would be exclusive to Lund. Any help would be appreciated.

Thanks

Attachments:

1. 

   F13A374D-5094-4C16-A12E-7541860EB8BD.jpeg
   

2. 

   5EA6F08B-86C6-49AF-AFD6-74040AD1BBAB.jpeg
   

3. 

   345707EE-882D-4D8B-9A56-146B3B50C427.jpeg
   

i am not sure where to find a similar one…all i know is i helped put one in a couple weeks ago and we soaked it in hot water (in a cooler) and then while we were pushing it in we used a heat gun to keep it soft. Those things get rock hard when cool

mine came out in a couple small sections, used a hair dryer to heat it up, screwdriver to guide back in track, when it cooled, you couldn’t tell where it was out.

huskyjerk wrote:

I am looking for a replacement rub rail insert for my 2007 Lund Pro Angler. I have looked online and can find some similar but not quite like this one. Everything I have found is symmetrical, mine is different on the top vs the bottom. I wouldn’t think this would be exclusive to Lund. Any help would be appreciated.

Thanks
Did you find replacement? I am currently looking for same thing and can’t find it

Did you find replacement? I am currently looking for same thing and can’t find it

I did find some. My local Lund dealer happened to have some on the shelf from an old job they had done.

Any chance you have any left or know where I can get some of this? I’m looking for the exact one.

Call your local Lund dealer and have them order it from Lund