Rocker Switch Covers

  • joe4who
    Posts: 7
    October 1, 2023 at 5:40 am #2227165

    Hi Guys,
    Im new here and just bought a used Lund.
    I have been looking high and low for rocker switch covers that will fit,, Must be that Lund used something special ? Or maybe they are just out dated ?

    Any help New Or used would be appreciated.

    2015, 1775 Impact, See Attached.

    Thanks,
    Tom

    Attachments:

    1. Lund-Ropcker-Switch.jpg

    biggill
    East Bethel, MN
    Posts: 11321
    October 1, 2023 at 8:54 am #2227179

    You’ll need to figure out the brand of rocker switch in order to find a cover for them.

    I have purchased custom covers from here and was really happy with them.

    http://www.newwiremarine.com/

    isu22andy
    Posts: 1803
    October 1, 2023 at 9:57 am #2227182

    Great Lakes skipper will have new old stock lund switches . I’m confused what’s wrong here though all the switches look fine ? Or is there a waterproof cover that pulls over them or something ?

    joe4who
    Posts: 7
    October 1, 2023 at 11:03 am #2227191

    I ordered and have the http://www.newwiremarine.com/ switch covers But they are too wide for the panel.
    I have a Compleat set of 6 if anybody wants them ? (Free, just pay shipping).

    I also have already checked with Great Lakes Skipper and all they have is the hole complete panel for $150 bucks.

    The ones in the photo are what it’s supposed to look like, Mine all work but the labels are worn off (8-year-old boat, 1 owner, and garage kept) I thought they would be easy to find, but I am learning that anything Lund is Not easy to find.

    bigcrappie
    Blaine
    Posts: 4376
    October 2, 2023 at 10:01 am #2227303

    Lund uses a Chinese brand switch that is thinner then all the switch covers offered online. I found replacement switches on EBay but have looked High and Low for replacement covers to no avail. Only thing to do is upgrade to the 1″ switches but that requires modification the dash mounting plate and could be a lot work. Thanks Lund, trying to be cheap

    joe4who
    Posts: 7
    October 2, 2023 at 10:33 am #2227310

    The dealer says that Lund is not very easy to work with.
    They can get the compete switch for about $30 each and could take weeks.

    I just bought the whole dash panel (switches included) from Great Lakes Skipper for $150 and it should be here tomorrow.
    I will just steel the switches from the new panel to replace mine.

    If anybody wants the new panel (less switches) its Free, just pay shipping.

    Thanks for all the input.

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.