Ratchet strap replacement

  • John Luebker
    Posts: 694
    #1478524

    I plan on replacing all ratchet straps on the 5 ladder stands we have. Just wondering if the larger ones at menards would do the job. I have seen many rated for 500-1000 lbs with a break strength much higher. I have to believe that would do the job. And they are a lot cheaper than what the tree stand company’s sell.

    So obviously safety is a concern which is why I am asking the question, but is there a certain type of strap to look for?

    Also I would like to replace the stabilization straps that cross behind the tree, Anyone have a recommendation on fabric for those?

    TheFamousGrouse
    St. Paul, MN
    Posts: 11832
    #1478538

    I have used similar straps as a replacement. Obviously, the key is never to rely on a single strap or piece of hardware to hold up the stand. I use a minimum of 2 per stand.

    Also, what I’ve done is bought a pack of cheap ratcheting straps that I use just to keep the stands in place over the off season. They I go up and replace them with good straps in about September. That saves the wear and tear on the good straps and I don’t have to worry about how sun rotted the straps got every year.

    Grouse

    Protourbaits1
    Posts: 191
    #1478790

    I always put two ratchet straps on my stands now. Menards sells a 4-6 pk of 300 lbs rated straps, so with two you’re getting 600 lbs )

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.