Trailer Tire Pressure

  • Dave Koonce
    Moderator
    Prairie du Chien Wi.
    Posts: 6946
    #1316624

    What do you keep the pressure at on your Ranger Trailer ?

    jim-bailey
    Clinton County Iowa
    Posts: 134
    #1189668

    I run mine at the maximum pressure allowed on the sidewall.
    That is the pressure the tire is rated at for maximum load.
    Works for me. Good luck.
    Jim

    Hot Runr Guy
    West Chicago, IL
    Posts: 1933
    #1189685

    I used to run my Goodyear Marathons at 60psi, per this Goodyear memo Marathon pressures

    since, in the words of Sammy Hagar, I can’t drive 55,,,,,

    HRG

    randy-k
    West Central MN
    Posts: 106
    #1189737

    Mine are at 35# on my 620T. It’s a 2010 tandem axle with
    original Goodyear Marathons. Tires look good and are wearing
    very evenly. Just took them in last week for a spin balance
    check. They needed a slight adjustment there.

    jon_jordan
    St. Paul, Mn
    Posts: 10908
    #1189777

    The pressue noted on the trailer manufacture stamp. 50 pounds.

    -J.

    Paul Heise
    River Falls, Wi
    Posts: 723
    #1189788

    I always run my trailer tires 5 lbs over sidewall on all my trailers if I’m going to be traveling longer distances at 65-70+ mph. Keeps them cooler at those speeds. Never had any troubles with running em there.

    Dave Koonce
    Moderator
    Prairie du Chien Wi.
    Posts: 6946
    #1189790

    Well,
    I had the rig in the yard and thought the tires looked a bit soft. When i checked them they were all at 24# . I think i wll get them to 50# next time out…

    Weird how they were all at 24#

    ironheadr5
    Northeast, Iowa
    Posts: 373
    #1189802

    I run mine at the maximum rated pressure listed on the tire.

    mxskeeter
    SW Wisconsin
    Posts: 3754
    #1193529

    I run mine at 50 lb, unless I’m going to be sailing down the 4 lane at 75mph for any distance in hot weather. If that is the case pump them up to 60 lb.

Viewing 10 posts - 1 through 10 (of 10 total)

You must be logged in to reply to this topic.