Powerdriver v2 problem

  • wiswalleyenut
    Central WI.
    Posts: 343
    March 26, 2015 at 5:45 pm #1527601

    My 70lb Powerdirve v2 is not working. It has less that 5 hours run time(bought new last summer with new boat). It has power, 4 bars on the battery guage. The foot pedal is completely unresponsive. Can someone look at their foot pedal plug and tell me how many pins I should be seeing?(wondering if a pin isn’t broken or missing, mine has 6) Any other suggestions would be great. I have a trip planned to the Wisconsin River on Saturday, and don’t have close access to a new foot pedal to see if that is the issue. Thanks in advance!!

    Nut

    wiswalleyenut
    Central WI.
    Posts: 343
    March 26, 2015 at 7:02 pm #1527637

    Found my problem. Drilled the shaft to mount a screw for the transducer cord and nicked the red wire. Should the bottom assembly thread off the shaft to replace the wire. It has threads that would suggest so.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.