H2O Precision Jigs

  • bill_cadwell
    Rochester, Minnesota
    Posts: 12607
    #1314192

    Hey Hoggie, Last night at the Seminar by James and Chris there were jig packs consisting of 2 each of 4 sizes single color combo bags that were being sold. Are these jig combos going to be sold by mail order through B-Fish-N Tackle? Been asked about it and need to know. By the way, for those of you who couldn’t make it to the seminar, you have to see these jigs. Great colors, special river current design, Big Mustad hooks, and a keeper to hold the plastics on. Has to be the best plastic jig I have seen. Thanks, Bill

    hawger
    Owatonna, MN
    Posts: 608
    #255555

    Yep, the “combo” packs are available. This is a good way to get the jigs in the sizes you want to try out.
    You can get two of each of these weights, in one color…
    3/32, 1/8, 3/16, 1/4 in the “small combo” bag
    or
    two of each of these weights in one color…
    5/16, 3/8, 1/2, 5/8 in the “large combo” bag
    That is eight of the H2O Precision Jigs for $6.00… the small combo for shallow and the large combo for deeper water use.
    Bill, just let me know what you’ll need.
    Dave Hoggard
    B-Fish-N Tackle

    steveo
    W Central Sconnie
    Posts: 4102
    #255556

    Dave,

    looking forward to trying them out. I understand that they have a “keeper” on them. what’s the best way to rig the plastics on to the jig?

    tony_apisa
    E. Moline Illinois along the Rock River
    Posts: 1180
    #255569

    Hey Dave, When are they going to be in the EFN Outlet Store?

    hawger
    Owatonna, MN
    Posts: 608
    #255636

    Rigging is the done the normal way… once on the hook, just use your finger tip to gently push down on the plastic above the wire keeper. This sets the wire keeper firmly into the plastic body.
    When removing the plastic, use your fingertips to pinch up the area above the keeper… so that as you pull the plastic off the wire keeper will not tear your plastic body. This way you may use the Doo, Ringworm or K-Grub over and over without damaging the plastic. This process is easy and will become a habit quick in changing out colors.
    Having the weight stamped on the H2O Precision Jig’s head is handy to know what weight you are throwing and will be an aid in grabbing a heavier or lighter jig to use.
    Dave Hoggard

    hawger
    Owatonna, MN
    Posts: 608
    #255637

    I am working on that with James… not sure when yet. I’ll try and keep you posted.
    Dave Hoggard

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.