Boat Ramps open??

  • grumpy
    Iowa, Clinton
    Posts: 489
    #1315906

    Clinton, IA from – Bellevue – South

    gotta float the boat
    all ramps in Clinton, IA are closed

    Brian Klawitter
    Keymaster
    Minnesota/Wisconsin Mississippi River
    Posts: 59992
    #964644

    I’d be Grumpy too!

    dan-tessmann
    Kieler, Wis
    Posts: 664
    #964647

    Dubuque has 2 ramps open and the bass are snappin on 11. Good luck, Dan

    dugout
    Dubuque Ia
    Posts: 154
    #964685

    You can get in at Bellevue.

    grumpy
    Iowa, Clinton
    Posts: 489
    #964743

    I took delivery of my new rig on 3/24/2011 and it still hasn’t gotten wet 5/10/2011!

    grumpy
    Iowa, Clinton
    Posts: 489
    #964746

    Is that the main ramp in Bellevue? Are the camping sites open? (ramps) The dnr is usually pretty good at updating info on their fishing report, I’ll have to check..

    I can actually hear the rubber drying out on the boat trailer

    thanks

    big-muddy
    Rockfalls, Illinois
    Posts: 202
    #964840

    I was over to Clinton on Sun. You can launch at either the 30th street boat ramp, or down in Albany. Al, at R&R said thet would be opening thr flood gates at 9th Ave. on Monday the 9th.

    grumpy
    Iowa, Clinton
    Posts: 489
    #965179

    the 30th st. ramp is very shallow, the current fills it up, as told by a commercial fisherman..I thought they closed sections of route 84 into albany!

    grumpy
    Iowa, Clinton
    Posts: 489
    #965489

    9th Ave still closed and one pump a pumping (5/12), I’ll go look at 30th Av No., this will be the very first time this boat will be in the water, launching could take awhile probably just hold off

    grumpy
    Iowa, Clinton
    Posts: 489
    #965651

    9th Av No. Clinton, IA – flood gate is open, approach to docks are under water. thanks everyone, now I need to review throttle controls (again) before launching..
    Can’t wait for a day on the river to get used to the boat, manuvering, approaching, slowing etc. can’t wait

    tony_apisa
    E. Moline Illinois along the Rock River
    Posts: 1180
    #965662

    You can always put in at Camanche. The current is a little squirrely. John Tucker and I put in there last Monday. Good luck with the new rig. Have fun.

Viewing 11 posts - 1 through 11 (of 11 total)

You must be logged in to reply to this topic.