Point 1 GPS puck and older units

  • ssperch
    Hudson, WI
    Posts: 175
    February 24, 2016 at 1:53 pm #1602068

    Hi All,

    After calling Lowrance and having 37 callers ahead of me I figured I would see if any IDOers knew the answer to my question…

    Does anyone know if the new Point 1 GPS puck receivers are compatible with 2006 LCX113 HD graphs?

    Sam

    candofish
    Turtle Lake wi
    Posts: 113
    February 24, 2016 at 2:04 pm #1602070

    I don’t think it will be compatible with that old of unit. I have a 2012 Lowrance Hds1 and they told me that it would not work properly with the Point 1 GPS. I believe it works with the HDS2 and later units.

    mwal
    Rosemount,MN
    Posts: 1050
    February 24, 2016 at 5:05 pm #1602112

    I have a Hds gen2 on my bow and its attached to the Point 1 gps. It then shares the signal with my Gen 1 on the dash. So you answer is that it only works with HDS gen 2 and newer devices. It works very well for my purposes

    Mwal

    John Shear
    Chippewa Falls, WI
    Posts: 205
    April 7, 2016 at 9:24 pm #1612341

    Sorry if I’m late and you don’t need the info anymore. The LCX units will work fine with the Point-1 GPS receiver. They just don’t take advantage of the higher data rate.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.