Onix and lakemaster help.

  • dave mcdyer
    Posts: 32
    April 10, 2015 at 11:25 pm #1533397

    So i updated me onix units to software 2.0 and now i cannot get depth contours on em. When i put the chip in it changes the dusplay but when i zoom in on the lake the lines do not show up. Any ideas?

    Josh Freeseman
    Posts: 15
    April 11, 2015 at 12:10 pm #1533487

    I’m not near my unit to give exact directions but somewhere there is an option to select navionics or lakemaster/humminbird for the chart make sure it isn’t set to navionics

    Ron
    Victoria, mn
    Posts: 812
    April 12, 2015 at 7:45 am #1533623

    I can’t believe the Onix doesn’t have the option to turn contour lines on or off. I have a HB 898, several years old that does. Read your owner’s manual.

    dave mcdyer
    Posts: 32
    April 18, 2015 at 10:59 pm #1535666
    Ron wrote:

    I can’t believe the Onix doesn’t have the option to turn contour lines on or off. I have a HB 898, several years old that does. Read your owner’s manual.

    It does have that option but it will not stay on if I select on it just jumps back.

    dave mcdyer
    Posts: 32
    April 18, 2015 at 11:01 pm #1535667
    Josh Freeseman wrote:

    I’m not near my unit to give exact directions but somewhere there is an option to select navionics or lakemaster/humminbird for the chart make sure it isn’t set to navionics

    I have it set to Humminbird

    dave mcdyer
    Posts: 32
    April 18, 2015 at 11:08 pm #1535669

    What really chaps my behind is product is shipped not up to date I install it. Contact hummingbird too ask why I cannot get them networked and they say oh it’s because you don’t have the right software. Mind you I had it for two days before this call. Lakemaster chips worked then. Update to 2.0 now it does not work. Cannot get Humminbird on the phone. And have close to 10,000.00 dollars of their product on my boat that doesn’t work. Not like I bought the cheap stuff. Oh and by the way went fishing tonight and my si unit stopped working and I had to unplug it to get it shut off. Monday is gonna be a day of reckoning.

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.