New Electronics Mounts?

  • ted-merdan
    Posts: 1036
    #2006424

    Looking for recommendations on electronic mounts for a pair of 12″ units in a tiller. Must be low profile so I can fish over them. Have used the large RAM’s in my last boat and would prefer to go in a different direction with this boat.

    What are others using or have seen in use?

    #2006436

    Stabil mounts get my vote. I tried everything to get my Cisco mounts to not move and I just couldn’t find a solution. My 12” units haven’t moved a hair since I made the change to Stabil units. Bill Shimota owns Stabil now and is a great guy to deal with as well!

    David Blais
    Posts: 766
    #2006465

    I really like my traxstech graph mounts

    reddog
    Posts: 803
    #2006473

    I went away from the large Ram ball mounts several years ago. I just couldnt buy into the price for the premium mounts and went to two Ram Swing Arm mounts. They are fully adjustable and will not move. I have a Helix 12 on the bow and a Solix 12 on the console. Quite happy with the $59 mount.

    Dean Marshall
    Chippewa Falls WI /Ramsey MN
    Posts: 5854
    #2006479

    Ted, on your boat, I believe you will find the Stabil to be perfect, others will work though.

    Dutchboy
    Central Mn.
    Posts: 16634
    #2006555

    What boat they going on? You buy a big Warrior tiller?

    ted-merdan
    Posts: 1036
    #2006635

    Thank you for all the replies, gives me a few options to look into over the weekend

    navtiller
    chippewa falls
    Posts: 68
    #2006698

    Blue Water mounts work very well

    Sodie
    Alma , Wisconsin
    Posts: 31
    #2006729

    On my 2090 I went with the 6” Balzout mounts. I did a mock up of different mounts before I decided which mount to go with. The Balzout had the most adjustability for me. If you sit in the tiller seat all the time while fishing the Cisco , Stabil type mount will be a great choice and save some money. When I troll Planer boards I sit or stand in center of boat and use the ulterra. So i turn both screens to front of boat. Works great. Congratulations on a great boat.

    Buckeye1
    Posts: 121
    #2016110

    For those of you with Cisco mounts, did you put a backer plate of some sort on the underside of the console?

    Does it matter if the mounting holes are side to side or front to back?

    I will be mounting on a Lund Impact side console.

    Chris Messerschmidt
    Minnesota
    Posts: 615
    #2016185

    I have tried just about every mount on the market so far with 12″ and 16″ graphs. I personally did not like my Cisco’s at all. They’re rock solid mounts and I like the ease of taking everything off, but I could not for the life of me keep the set nut on the arm to stay tight. I tried lock tite and everything on mine. Worse thing possible in rough water to have that come loose and then a 16″ graph spinning into the windshield.

    Ballzout was ok but couldn’t keep the bolt that holds them base into the arm in one piece. Had a couple of those break.

    I made the switch to Fin Gears new mounts. Hands down the best mounts I have used yet. Stabil also makes a decent mount, but Fin Gear gets my vote.

    Kurt Turner
    Kasson, MN
    Posts: 582
    #2016237

    I made the switch to Fin Gears new mounts. Hands down the best mounts I have used yet. Stabil also makes a decent mount, but Fin Gear gets my vote.

    Chris – please provide a web address for Fin Gear equipment. Google brings back a few hits but nothing fishing related.

    Thank you

    deertracker
    Posts: 9163
    #2016260

    <div class=”d4p-bbt-quote-title”>Chris Messerschmidt wrote:</div>
    I made the switch to Fin Gears new mounts. Hands down the best mounts I have used yet. Stabil also makes a decent mount, but Fin Gear gets my vote.

    Chris – please provide a web address for Fin Gear equipment. Google brings back a few hits but nothing fishing related.

    Thank you

    A friend is a partial owner. They are a new business. I know for sure they have a FB page. He also owns Renegade Outdoor Innovations. Maybe that helps?
    DT

    deertracker
    Posts: 9163
    #2016262

    Here is a few pics from FB. Looks like an all aluminum mount with cerakote.
    DT

    Attachments:
    1. FB_IMG_1613758770448.jpg

    2. FB_IMG_1613758795291.jpg

    deertracker
    Posts: 9163
    #2016265

    I sent him a message asking about a website. I’ll report back when I hear from him.
    DT

    isu22andy
    Posts: 1689
    #2146005

    Bumping this back up to the top . Mounting a helix 7 and 10 side by side on the dash of 2004 Crestliner superhawk . Should be a tight fit . Anyone know what length of mounts I need ?

Viewing 21 posts - 1 through 21 (of 21 total)

You must be logged in to reply to this topic.