Need a carb

  • jagermeister
    NW Ontario
    Posts: 101
    January 13, 2016 at 8:06 am #1592178

    Lazer mag 2 hp needs a carb, tecumpseh, anyone steer me in the right direction.
    Thanks

    icenutz
    Aniwa, WI
    Posts: 2540
    January 13, 2016 at 8:48 am #1592198

    I know that Farm & Fleet said they could order me a new one for less than $30, but that was a few years ago.

    Ralph Wiggum
    Maple Grove, MN
    Posts: 11764
    January 13, 2016 at 8:52 am #1592202

    If you have the old one, you can probably use the #s off of it to find a new one on ebay.

    404 ERROR
    MN
    Posts: 3918
    January 13, 2016 at 8:53 am #1592203

    There is an engine shop that goes to the St. Paul ice show and has been the only place I go to get parts. Their booth is always just down the way from Thorne Bros. I cannot remember the name of the guys, but they are in the north metro and have had no problems shipping the parts to me once they get them. Their card is at home, I will track it down and let you know if someone else doesn’t pipe in with their name. They were the only folks that didn’t scoff at me when I asked if they could get me parts for my Tanaka…

    puddlepounder
    Cove Bay Mille Lacs lake MN
    Posts: 1814
    January 13, 2016 at 10:34 am #1592240

    Call drock in new Brighton MN. Some models don’t have a replacement. He can retro fit one from a different engine. This carb has a primer inlet that needs to be plugged. It is the only option if it is the same carb that was on my strike master.

    692fisherman
    champlin mn
    Posts: 370
    January 13, 2016 at 1:34 pm #1592300

    x2 on d rock in Minnesota….. auger super store!!!

    jagermeister
    NW Ontario
    Posts: 101
    January 13, 2016 at 4:14 pm #1592355

    Does drock have a number I could reach him at. Thanks for the help

    suzuki
    Woodbury, Mn
    Posts: 18715
    January 13, 2016 at 4:55 pm #1592363
    jagermeister wrote:

    Does drock have a number I could reach him at. Thanks for the help

    (651) 639-0446

Viewing 10 posts - 1 through 10 (of 10 total)

You must be logged in to reply to this topic.