Name of marcum connector?

  • Jamin
    Hudson, WI
    Posts: 925
    #1805007

    Trying to piece together my own adapter cable. I’m pretty handy and have all the parts other than this male connector. Feel silly paying $35 for an adapter cable when all I need is the plug. Plus I’m going to tie in my glow cup and want it done properly rather than hacked together.

    Anyone know what these round two pin connectors are usually called? I tried googling “round 2 pin waterproof connector” along with some other variations and couldn’t come up with anything.

    TIA!

    Attachments:
    1. 2BD58A8F-A85A-46CA-BE4A-36B42288AC93.jpeg

    Crappy Fisherman
    Posts: 333
    #1805064

    Male Spade connectors. You can get the male and female at Fleet Farm or anyplace that sells electrical connectors.

    Huntindave
    Shell Rock Iowa
    Posts: 3082
    #1805113

    Male Spade connectors. You can get the male and female at Fleet Farm or anyplace that sells electrical connectors.

    He is looking for the other end, the one he has circled in the photo.

    Jamin
    Hudson, WI
    Posts: 925
    #1805202

    Thanks all for the links! Going to try and find a domestic source that I don’t have to order in bulk.

    Pailofperch
    Central Mn North of the smiley water tower
    Posts: 2912
    #1805788

    Maybe Marcum will sell you one over the counter at Versa Electric in Crystal MN. That’s their warranty shop, so maybe you’d get lucky.

    muskie-tim
    Rush City MN
    Posts: 838
    #1808023

    Thanks all for the links! Going to try and find a domestic source that I don’t have to order in bulk.

    Jamin did a find a source for the M12 2 Pin Connector? I am looking for one also.

    Jamin
    Hudson, WI
    Posts: 925
    #1808059

    I did not. With all the ones I could find, there was no guarantee I was going to get a compatible one without spending $8-15 for one connector first. I figured if I’m going to risk that money and possibly still end up with something incompatible, I may as well watch for a deal on the Marcum cable and just get it right the first time.

    Since I often make my own cables and connectors because I like things done right, I just hate the thought of spending $25-30 for a proprietary connector from Marcum. But, time is money and I probably have a few hours into research so it’s time to just bite the bullet and move on.

    FYI- Dicks has about the best price currently…$29.99 and free shipping.

    muskie-tim
    Rush City MN
    Posts: 838
    #1808077

    Thanks Jamin. Like you, seems I have spent to much time chasing this down. As frustrating as it to spend that much for such a simple cable may as well order it.

    This is like the outrageous prices HumminBird charges for the Ethernet cables and then you still need an adapter cable to connect to some units.

    Jamin
    Hudson, WI
    Posts: 925
    #1808233

    djs-
    That’s close but the male side I need looks to be some kind of grommet mount. It doesn’t have the sealing cable boot like the female end. Which is what I need to properly connect my Helix to the shuttle.

    Appreciate the suggestion though!

    Joshua Gunderson
    Posts: 1
    #1810442

    I am fairly frustrated by this as well. You can buy the female end with cable for $10, but the male end is $35. Frustrating money grab in my eyes.

Viewing 15 posts - 1 through 15 (of 15 total)

You must be logged in to reply to this topic.