Mr. Heater

  • rkd-jim
    Fountain City, WI.
    Posts: 1606
    #1726600

    I have the Mr Heater Buddy and want to change it over to a 5# cylinder. Do I need a hose with a regulator or just the one with the correct adapters?

    munchy
    NULL
    Posts: 4931
    #1726602

    You need either the hose with the regulator OR a hose with the filter attachment.

    big_g
    Isle, MN
    Posts: 22456
    #1726639

    Why a regulator with a 5 lb ? ???

    deertracker
    Posts: 9237
    #1726641

    I have run a 20lber without a filter or regulator for years with no issues.
    DT

    gotalunker
    Zimmerman, MN
    Posts: 153
    #1726684

    get the standard hose and a $10 filter. You’ll be good to go. no need for a regulator.

    deftones311
    Southern MN
    Posts: 19
    #1726838

    10ft Buddy Series Propane Hose Assembly connects appliances that are designed to be connected to a 1lb bottle to 5 to 20lb tanks. Swivel 1 – 20 in Male Throwaway Cylinder Thread x Soft Nose Excess Flow P.O.L. with Hand wheel Connects appliances that are designed to be connected to 1 lb. bottles to 5 to 20 lb. tanks Connects to low pressure and high pressure tanks Specially designed material eliminates need for fuel filter Hand tighten swivels on both ends part number f273704 what I use no problem

    munchy
    NULL
    Posts: 4931
    #1726891

    Why a regulator with a 5 lb ? ???

    From what Mr Heater has told me and what I have read you should use EITHER a regulator OR a filter. The reason they are there is to prevent liquid propane from reaching the unit.

    And a 5lb is the same concept as a 10, 20 or 100lb. Just smaller.

    Mike S
    Posts: 108
    #1726898

    I was considering what to get myself. I ended up going with the 12 ft. hose and regulator because it also had the quick coupler to hook up to the big buddy.

    deftones311
    Southern MN
    Posts: 19
    #1726900

    Yep, if you have a big buddy and a small buddy then that 12 ft the way to go with quick connect but what I got from mr heater last year as long as you dont have the quick connect and you have the right part f273704 designed for the buddy pay alittle more but dont have to buy the other parts for it cuts out the filter and regulator

Viewing 10 posts - 1 through 10 (of 10 total)

You must be logged in to reply to this topic.